21104-88 Double Sealed Mini
DOUBLE SEALED MINI BALL BEARINGS-GEN2110488>
Recently Viewed
DOUBLE SEALED MINI BALL BEARINGS-GEN2110488>
Dichtomatik N70151 O-Ring, 151 Dash Number, 2.987 in ID x 3.193 in OD, Nitrile Rubber, 70 Shore A Durometer, Import Custom 151
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
TAPERED ROLLER BEARING CUP - NTN13830>
Dichtomatik N70137 O-Ring, 137 Dash Number, 2.05 in ID x 2.256 in OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom 137
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Bore Diameter (Inner): 60 mm Outside Diameter (Outer): 110 mm Width: 22 mm Closure Type: Double sealed / dual shielded (SZZ)Bore Type: Straight / cylindrical Maximum Speed: 7,000 Primoradial Dynamic Load Capacity: 10,700 lb. Radial Static Load Capacity: 7,310 lbf
McGill® 0001630000 MI Series Narrow Machined Separable Inner Ring With Oil Hole and Annular Groove, 1 in ID x 1.2491 in OD, 1.01 in OAW, For Use With GUIDEROL® GR 20 N, CAGEROL® MR 20 N Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
