2-MM-9107-WI-CR FAFNIR/TIMKEN BEARINGS
PRECISION BALL BEARING-FAF2MM9107WICR>
Recently Viewed
PRECISION BALL BEARING-FAF2MM9107WICR>
Sprayon LU201 Open Gear and Wire Rope Lubricant is a high performance lubricant that penetrates metal surfaces to reach the core of wire rope. LU201 provides a wide range of lubrication at high temperatures while adhering extremely well to surfaces. It travels on metal surfaces to displace water, resulting in excellent rust protection. Can be used while equipment is in operation.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
3/8" DIAMETERX2-1/4" SHOULDER BOLT-HOL08052 >
Lincoln® 90776 Easy Out Grease Fitting Tool, 1/8 in Thread Size
A combination tool used to remove worn or broken fittings and to retap holes for installation of new fittings. Tool contains sockets for removing both straight and angle fittings. May also be used to remove old pin-type fittings.
