Milwaukee® 8980 Heat Gun Kit, 120 VAC, Dual
This professional line of heat guns offer ergonomic style and powerful heating elements. With stay cool handles and heat shields, you can use these all day while you stay cool. The 8980 kit offers the 8975-6 heat gun in an impact resistant case and a selection of 4 nozzles.
-
BrandMilwaukee®
-
UPC045242062935
-
Manufacturer Part Number8980
-
CountryUSA|Canada
-
Temperature Rating570 to 1000 deg F
-
Tool/KitBare Tool
-
Voltage Rating120 V AC
-
Air Flow Rate14.8 cfm
-
Amperage Rating11.6 A
-
Dimensions10-1/8 in L
-
Switch TypeRocker
- Unique impact-resistant heating element
- Efficient soft air velocity increases surface temperature much faster than conventional hot air heat guns
- 3-position rocker switch - off, high and low
-
UNSPSC27112717
-
Warranty5 Years
Recently Viewed
This professional line of heat guns offer ergonomic style and powerful heating elements. With stay cool handles and heat shields, you can use these all day while you stay cool. The 8980 kit offers the 8975-6 heat gun in an impact resistant case and a selection of 4 nozzles.
Dormont® SafetyShield® 0242482 20C, 20C-3132-24B Gas Connector, 3/8 in Nominal, MNPT x FNPT End Style, 85000 Btu/hr Natural Gas, 136000 Btu/hr Liquid Propane Flow Rate, 24 in L, 304 Stainless Steel
This 1/2 inch OD, 3/8 inch ID, durable, corrosion resistant stainless steel gas connector is configured with 1/2 inch MIP x 1/2 inch FIP adapters and is 24 inches in length. This CSA approved SafetyShield(R) gas connector features a premium antimicrobial coating to inhibit bacteria growth, improve corrosion and UV protection, and enhance flame and smoke resistance. The yellow coating is an industry recognized color for gas lines and provides extra corrosion protection from accidental contact with harmful chemicals that may be found in household products. It is commonly used for the installation of home appliances such as gas dryers and water heaters. Item comes in a bag.
STRAIGHT-ID SELF-ALIGNING BALL BEARING-NTN1305 >
MasterDrive Q2-2.1/8 Q2 Series Double Split Tapered Bushing, 2.12 in Dia Bore, 2-7/8 in Dia Barrel, 4-1/8 in Dia Flange, 3-1/2 in OAL, Ductile Iron
Double Split Tapered Bushings are used on sheaves, sprockets and pulleys to provide increased clamping force over standard bore-to-size components. They are tapered in design with flanges and utilize cap screws to tighten on the shaft. The double split design assures better concentricity to the shaft and provides the highest degree of mechanical locking component to component. Most sizes are contructed of ductile iron to provide strength and duarability. Each Split Taper Bushing series is produced in a number of different bore size options, most that include a keyway, allowing users flexibility when using sheaves, sprockets or pulleys in applications that may utilize various shaft sizes.
Greenlee® ESM™ DM-200A Digital Multimeter, 60 mV to 1000 V AC/DC, 600 mA to 10 A, 600 Ohm to 60 MOhm, 600 nF to 300 uF Measuring, 600 Ohm, 6/60/600 kOhm, 6/60 MOhm, Backlit LCD Display
200A series was designed to provide all of the critical day to day features of handheld multimeters in a smaller, ergonomic design. Look to this series for CAT IV 300 VAC, CAT III 600 VAC and CAT II 1000 VAC applications. Backed by Greenlee® lifetime limited warranty, the 200A series multimeters offer the professional electrician superior value when compared to the competition.
Gates® Power Transmission Super HC® PowerBand® 5/5V2240 Banded Heavy Duty V-Belt, 5V Section, 5/8 in W Top, 224 in L Outside, 35/64 in THK, Chloroprene
Combines the strength of a wrapped belt construction with the economies of a narrow section V-belt. Transmits more power in a given space and allows more compact drive design than classical section V-belts. In short, it offers you more power and considerably reduces the space needed. This significantly cuts the overall drive cost. Super HC™ V-belts also have exclusive Gates construction features for longer life on your drives.
