GA-7911 7" & 9" 6000-rpm Electric Angle
7" & 9" 6000-RPM ELECTRIC ANGLE SANDERS-MAKGA7911 >
Recently Viewed
7" & 9" 6000-RPM ELECTRIC ANGLE SANDERS-MAKGA7911 >
Electroline Plus 8348 Standard Radius Conduit Elbow, 3 in Trade, 90 deg, Steel, Epoxy Modified Acrylic/Galvanized
Wheatland controls the manufacture of its hot dip galvanized steel rigid metal conduit (RMC), electrical Metallic tubing (EMT) and Intermediate metal conduit (IMC) every step of the way. we fabricate our own tubing from flat steel coils, weld it and do our own galvanizing. Then to be sure you get the same quality throughout the raceway system, we make our own nipples, elbows and couplings to match. in fact, we're the only conduit manufacturer who does.
3/8" FITTING; COPPER TUBE BRUSH WITH STEEL CRIMPED BRISTLE-JWH413860 >
Dichtomatik N70334 O-Ring, 334 Dash Number, 2.6 in ID x 3.02 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Sealmaster 1-15/16"-ID 4-BOLT SPH FLANGE UNIT BRW SFB-1000-NE X 1-15/16
Sealmaster® USRB performance mounted spherical roller bearings feature black oxide treated bearing steel races with optimized bearing geometry for load capacity, misalignment and speed capabilities. The USRB is available in both setscrew locking and adapter mounting system. The felt seal with flinger provides a good balance between contaminant entry, grease retention and friction. Depending on application requirements, these bearings are available in a wide variety of bore sizes, housing styles and sealing options.
WATTS® 0009330 LF25AUB-Z3 Pressure Reducing Valve, 1 in Nominal, FNPT Union x FNPT End Style, 10 to 35 psi Pressure, Cast Copper Silicon Alloy Body
This 1 inch lead free brass water pressure reducing valve for low pressure ranges is designed to reduce incoming water pressure to protect plumbing systems and reduce water consumption for commercial, industrial and residential applications. The easy maintenance assembly consists of a replaceable seat module, NPT threaded female union inlet by NPT female outlet and a bypass feature to control thermal expansion pressure. The temperature range is 33 to 180 degrees F (0.5 to 82 degrees C). The low pressure range is 10 to 35 psi (69 to 241 kPa) with the standard setting at 30 psi (207 kPa).
