Power Tool Parts & Repair Kits

Coring rig Dymo-Rig water hose, 8 in., 5/8 in. x 8 Ft, standard brass male and female hose fittings, includes water hose.

Milwaukee® 49-15-0260 Side Handle, For Use With 0233-20 Magnum™ Drill

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee at our website.

Switch box, 20 amp, 120 Volt. Ammeter and power switch are located on the front of the receptacle for easy operator access. Supplied as standard equipment with diamond drill rig model 4115-22 and 4120 - 22.

This item is the replacement die for Milwaukee's 10 gauge nibbler model 6880. The replacement punch, 48-44-0265, is purchased separately. Must be used with allen wrench 49-96-0350 to remove the punch or die.

The MILWAUKEE® M12 FUEL Punch and Die Set is to be used with the MILWAUKEE® M12 FUEL 16-Gauge Nibbler Bare Tool. The accessory punch and die is the portion of the tool that performs the cutting functionality and must be routinely replaced. This accessory is good for cutting thin sheet metal and corrugated materials.

This item is the replacement die for Milwaukee's 16 gauge nibbler model 6890. The replacement punch, 48-44-0260, is purchased separately. Must be used with plate wrench 49-96-4725 to remove the protective collar and 49-96-0330 2.5 mm wrench to remove the die.

This item is the replacement punch for Milwaukee's 10 gauge nibbler model 6880.

This item is the replacement punch for Milwaukee's 16 gauge nibbler model 6890. The replacement die, 48-44-0270, is purchased separately. Must be used with plate wrench 49-96-4725 to remove the protective collar and 49-96-0330 2.5 mm wrench to remove the punch.

The MILWAUKEE® 7 ft Concrete Vibrator Shaft is designed to transfer power from the motor to the concrete vibrator head. These shafts offer superior durability and productivity. The all-metal coupling prevents melting and deformation throughout the shaft’s life. All Milwaukee shafts feature a quick connect system that allows professionals to quickly and easily attach and detach the shaft. The Concrete Vibrator Shaft is for use with the MX FUEL™ Backpack Concrete Vibrator.

The MILWAUKEE® 1-1/2 in. Concrete Vibrator Head is designed to produce high amplitude vibrations to remove air pockets from the concrete and evenly distribute aggregate, resulting in higher quality concrete. This 1-1/2 in. head has a 6 in. radius of action. The Concrete Vibrator Head is made for the MX FUEL™ Backpack Concrete Vibrator.

Keep all the tools to change your SWITCHBLADE™ in this handy, self-contained storage case. The SWITCHBLADE™ replacement kit includes three replacement blades, one feed screw, two set screws, and an integrated hex wrench. 1-3/8 in. SWITCHBLADE™ 3 blade replacement kit come with: (3) 1-3/8 in. SWITCHBLADE™ Selfeed bit blades, (1) feed screw, (2) set screws, built in hex wrench with storage case.

Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thick wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.

This is the same base assembly included with diamond drill rig model 4130 and 4136 and can be used with models 4125. Use when drilling area is not in confined spaces. This base offers greater support for the diamond drill rig and vacuum assembly than the 48-10-0080 base. Includes two wheels and four leveling screws.

Allows 5-1/2 in. for right angle drill head and chuck. Provides two additional drilling speeds. Chuck transferred from drill to low spindle of right angle unit reduces drills normal speed by 1/3 and increases drilling torque by 50%. Chuck transferred to opposite spindle of right angle unit increases speed by 50%.

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee® specified replacement parts to achieve maximum life and performance from your tool. If unable to locate an accessory or repair part please contact Milwaukee® via its website.

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.

Milwaukee® 44-86-0455 Retainer, For Use With 6880 Serial 630D 10 AWG Nibbler

Milwaukee® 43-44-0605 Base Gasket, For Use With 4120 Serial A09A Large Base Dymorig

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.

Milwaukee® 42-04-0600 Water Hose Adapter, For Use With 4094 Serial 740-1001 2-Speed Dymodrill

This contractor series large base stand features a cast aluminum base with 4 levelling screws for fast accurate levelling adjustment. The durable precision ground 2-1/2 in steel column is 43-1/2 in high and has a universal motor adapter plate. The reversible feed handle helps the operator use the unit from either side.

The MILWAUKEE® M18 FUEL™ HAMMERVAC™ 1-1/8” Dedicated Dust Extractor (2915-DE) features an inline design engineered to connect directly to and be powered by the M18 FUEL™ 1-1/8” SDS Plus Rotary Hammer (2915-20). Utilizing the same replaceable certified HEPA filter as other HAMMERVACS™, which filters 99.97% of all particles greater than 0.3µm, means more compatibility on the jobsite. The built-in adjustable depth stop and ruler offer easy and precise adjustments. The dust extractor delivers complete OSHA Table One Compliance when drilling up to 1-1/8 inch diameter and 8 inch depth. This dust extractor features the Milwaukee AUTOPULSE™ Filter Cleaning Mechanism that automatically cleans the filter after each use, ensuring more effective drilling for longer before needing to empty the dust box. The dust box comes equipped with a vacuum port that allows for suctioning out the dust with a large vacuum or dust extractor (such as the 0888-20) instead of dumping the dust out into a trash receptacle, ensuring minimal exposure.

The M18™ FUEL™ 1/2 in Drill/driver with ONE-KEY™ is the industrys most powerful drill, delivering up to 60% more power, up to 1.5 in Shorter L and up to 2X faster speed under heavy load. The POWERSTATE™ brushless motor produces 1200 in-lb of torque and 2000 rpms providing fast drilling through demanding applications. At 6.9 in length, this is the most compact drill in its class, allowing better access in tight spaces. REDLINK PLUS™ intelligence ensures maximum performance while protecting from overloads, heating and over-discharge. The M18™ REDLITHIUM™ battery packs deliver more work per charge and more work over the life of the packs than competitors. The best-in-class all-metal ratcheting chuck provides increased bit strength and corrosion resistance. With ONE-KEY™, users gain the ability to customize, track and manage their tool. Anti-kickback technology increases control in bind-up situations and reduces unwanted shut-downs, with the added benefit of sensitivity control and ability to turn on and off based on application. Using the tools tracking functionality, if ever lost or stolen, lock it out to protect your investment.