Paslode® 816007 Fuel Cell Kit, For Use With Paslode® Cordless Finish Nailers
The fuel your nailer needs for just pennies per shot. Paslode® fuel cells give you the power to drive up to 1200 nails and are easy to load. Use Paslode® fuel cells as part of your nailing system to keep going until the job is done.
-
BrandPaslode®
-
UPC759501113824
-
Manufacturer Part Number816007
-
CountryUSA
-
Bare Tool/KitKit
-
Suitable For Use WithPaslode® Cordless Finish Nailers
- Fuel cell drives approximately 1000 nails
- For fuel life, check the "Best used Before" date printed on the bottom of the can
- Provides a precise fuel dose for reliable drive performance
-
UNSPSC27112800
-
Package Description2/PK
Recently Viewed
Paslode® 816007 Fuel Cell Kit, For Use With Paslode® Cordless Finish Nailers
The fuel your nailer needs for just pennies per shot. Paslode® fuel cells give you the power to drive up to 1200 nails and are easy to load. Use Paslode® fuel cells as part of your nailing system to keep going until the job is done.
Justrite® 08300 Horizontal Drum Vent, 2 in NPT/NPS Bung, For Use With 205 L Petroleum Based Solvent Drums, Brass, Brass
Automatic pressure relief ensures safe workplace. No more worrying about pressure building up in your drums. These safety drum vents automatically relieve pressure between 3 and 8 psi (30 to 55 kPa). Vents are tested to allow 61 cubic inch (1-L) of water through a 3/8-in (9.5-mm) pipe nipple in less than 6 seconds. Keep the vent in closed position to prevent flammable vapor from escaping. A built-in flame arrester helps absorb and dissipate heat for added safety. Vacuum relief is automatic on vertically installed vents and manual on horizontally installed vents. Drum vents are FM Approved. For protection and avoidance of high-pressure drum failure while dispelling heat using its flame arrestor.
RETAINING RINGS ARE PRECISION ENGINEERED COMPONENETS, WHICH WHEN APPLIED IN BORES PROVIDES A SHOULDER THAT ACCURATELY POSITIONS, LOCATES OR RETAINS OTHER PARTS OF AN ASSEMBLY. THEY CAN BE USED TO REPLACE PINS AND WASHERS, THREADED SECTIONS, COLLARS, MACHINE SHOULDERS AND OTHER COSTLY OR TIME-CONSUMING METHODS
.025" UTILITY KNIFE BLADES--5 PACK - JWH314137 >
5" X 2" 325# RIGID CASTERS-PJCMH520HR64R >
TCM15182VB>
