97" X 16-GAUGE FLOOR HAND BRAKES JET752002
97" X 16-G FLOOR HAND BRAKE
Recently Viewed
97" X 16-G FLOOR HAND BRAKE
10" 220-GRIT PSA SANDING DISCS-SAI35160 >
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
The Crosby G-210 Straight-Side Screw Pin Chain Shackle is a reliable, high-strength rigging solution for in-line connections where space is limited. Featuring a narrow, straight-sided body and Crosby’s signature Red Pin® alloy screw pin, each shackle is forged, quenched, and tempered for strength and durability. The G-210 is hot-dip galvanized and proudly made in the USA, with the Working Load Limit (WLL) and Grade 6 permanently marked on every shackle.
This shackle is fatigue rated to 20,000 cycles at 1.5x WLL and meets or exceeds the performance requirements of ASME B30.26 and Federal Spec RR-C-271H. It is approved for use in a wide temperature range from -40°F to 400°F
The Crosby G-209 5/8" is a heavy-duty, hot-dip galvanized screw pin anchor shackle featuring a 3.25-ton (6,500 lbs) Working Load Limit (WLL). Forged, quenched, and tempered by Kito Crosby, it is a industry-standard rigging component easily identified by its signature Red Pin®
