Impact Wrench Accessories
Milwaukee® SHOCKWAVE™ 48-32-5100 Impact Socket Adapter, 1/2 in Bit/Drill Size, 7/16 in Shank Dia, Hex Shank
The Milwaukee SHOCKWAVE™ lineman's 7/16 in. hex to 1/2 in. square adapter is the most durable adapter on the market and it's pin detent allows for better retention to the socket. The adapter features an optimized Shockzone™ that absorbs peak torque and prevents the adapter from breaking, providing up to 30X life. The adapter is made from Custom Alloy76™ steel, which maximizes it's resistance to wear and shock. The 7/16 in. hex shanks allows the adapter to lock into all 7/16 in. quick connect chucks.
Milwaukee® 49-16-2767 Ring Protective Boot, For Use With M18™ FUEL™ 2767-20 and 2863-20 High Torque Impact Wrench, 1/2 in Ring
The Milwaukee 49-16-2767 tool boot is for use with the M18 FUEL™ high torque impact wrench (2767-20 & 2863-20) only. This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.
Milwaukee® 49-16-2564 M12™ FUEL™ Protective Boot, For Use With M12™ FUEL™ 2564-20/2565-20/2565P-20 Right Angle Impact Wrench
The Milwaukee® 49-16-2564 tool boot is for use with the M12 FUEL™ Right Angle Impact Wrenches (2564-20, 2565-20 and 2565P-20) only. This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.
Milwaukee TOOL BOOTS MWK 49-16-2763
The Milwaukee® (49-16-2763) tool boot is for use with Milwaukee® M18™ fuel high torque impact wrenches, models (2762-20), (2763-20) and (2764-20) only. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.
Milwaukee STUBBY IMPACT BOOTS MWK 49-16-2554
The Milwaukee 49-16-2554 tool boot is for use with the M12 FUEL™ Stubby impact wrenches (2554-20, 2555-20, and 2555P-20) only. This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.
Milwaukee RUBBER PROTECTIVE BOOTS MWK 49-16-2867
The Milwaukee 49-16-2867 protective boot is for use with the M18™ FUEL™ 1 in. high torque impact wrench (2867-20) only. This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.
Milwaukee RUBBER BOOT TOOL COVER MWK 49-12-0012
Fits M18™ FUEL™ Compact Impact Wrench model numbers 2754-20, 2755-20, and 2755B-20.
Milwaukee RETAINING RINGS MWK 34-60-1030
Milwaukee® 34-60-1030 Retaining Ring, For Use With CP8730 Serial A33A 14.4 VDC 3/8 in Square Impact Wrench
Milwaukee BRUSH/SPRING ASSEMBLYS MWK 22-18-0040
Milwaukee® 22-18-0040 Carbon Brush Assembly, For Use With 9075-20 Serial 239D 3/4 in D.I. Impact Wrench, 9070-20 1/2 in D.I. Impact Wrench
Ingersoll Rand 2131-TK2 Tune-Up Kit, For Use With Ingersoll Rand 2131 Series Impact Wrench
Ingersoll Rand 2131-TK2 Tune-Up Kit, For Use With Ingersoll Rand 2131 Series Impact Wrench
Black&Decker 4-PC PIVOTING IMPACT NUTDRIVER SET BD- DWPVTDRV
Excellent for tight spaces and corners, DeWALT® Impact Ready® pivoting nutdrivers pivot up to 20 deg to fit into tight spaces and corners. Recessed corners enable users to drive on flats, minimizing shavings to maintain a clean work area. An industrial strength magnet maximizes fastener retention. Designed for impact drivers and wrenches.
Recently Viewed
5/16" X 1-3/4" USS Socket Head Capscrew
Milwaukee® 48-20-9057 SHOCKWAVE™ Masonry Single Ended Drill Bit Set, 5/32 in Min Drill Bit, 3/8 in Max Drill Bit, 7 Pieces, For Use With Hammer Drill Drivers, Carbide
The MILWAUKEE® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. The POWER TIP™, available in sizes 3/8" and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers.
Milwaukee® 48-20-9011 SHOCKWAVE™ Single Ended Hammer Drill Bit, 1/4 in Drill Bit, 1/4 in Hex Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
The MILWAUKEE® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. Engineered with a precision ground tip, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers. Available in diameters up to 1/2 inch.
Milwaukee® 48-20-6716 Drill Bit, 11/16 in Drill Bit, 11/16 in Shank SDS-Plus Shank, 10 in D Cutting, 12 in OAL
The MILWAUKEE® SDS Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD™ protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8” – 1-1/2”, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS Plus rotary hammers. For use in rebar only.
Milwaukee® 48-20-6724 Drill Bit, 13/16 in Drill Bit, 13/16 in Shank SDS-Plus Shank, 10 in D Cutting, 12 in OAL
The MILWAUKEE® SDS Plus Rebar Cutters are the toughest in rebar, delivering up to 3x life in rebar compared to competitive rebar cutters. These bits, designed with precision ground carbide for rebar only drilling, provide up to 10x faster drilling speeds in rebar vs. 4-cutter drill bits. Milwaukee SDS Plus Rebar Cutters are equipped with HAMMER GUARD™ protective shanks, preventing carbide teeth destruction from accidental use in rotary hammer mode, saving time and money. Deep debris channels provide the fastest rebar shard removal while double ejection slots allow for easy rebar slug removal. Available in sizes 3/8” – 1-1/2”, Milwaukee SDS Plus Rebar Cutters are the optimal solution for drilling embedded rebar for corded and cordless SDS Plus rotary hammers. For use in rebar only.
