Milwaukee IMPACT WRENCH--USE "MWK" 2962-22-R
The MILWAUKEE® M18 FUEL™ 1/2" Mid-Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 650 ft-lbs of nut-busting torque and only weighs 5.1 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This battery-powered impact wrench is the most compact in its class, allowing access to stubborn fasteners in spaces where larger impact wrenches can't fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. This kit includes (1) M18 FUEL™ 1/2" Mid-Torque Impact Wrench w/ Friction Ring, (2) M18™ REDLITHIUM™ 5.0Ah Batteries, (1) M12™/M18™ Charger, and a Contractor Bag.
-
BrandMilwaukee®
-
UPC045242568949
-
Manufacturer Part Number2962-22
-
CountryUSA|Canada
-
Torque Rating650 in-lb
-
TypeCordless Variable
-
Voltage Rating18 V
-
SeriesM18™ FUEL™
-
Housing MaterialAluminum
-
Bare Tool/KitKit
-
Battery Capacity5 Ah
-
Battery IncludedYes
-
Battery TypeLithium-Ion
-
Speed2575 rpm
-
Drive Size1/2 in
-
Overall Length6 in
- Best power to weight ratio is offered as the tool provides 650 ft-lb of nut-busting torque at only 5.1 lb with a 5 Ah battery
- 6 in L provides most access in tight spaces
- Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
- 4-mode DRIVE CONTROL™ provides greater control over output speed and power, includes auto shut-off and bolt-removal mode
- Auto shut-off mode prevents over tightening and increases productivity by applying no more than 35 ft-lb of torque
- Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened
- Mode-1 rpm - 0 to 1250, mode-2 rpm - 0 to 1950, mode-3 rpm - 0 to 2575, mode-4 rpm - 0 to 2575
- Mode-1 ipm - 0 to 900, mode-2 ipm - 0 to 2100, mode-3 ipm - 0 to 3100, mode-4 ipm - 0 to 3100
- REDLINK PLUS™ Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
- Works in up to 69 kV environments
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 60YT25 |
-
UNSPSC27112713
-
Package Description1/PK
-
Standards/ApprovalsCSA Certified|UL Listed
-
Warranty5 years for Tool, 3 years for Battery
Recently Viewed
The MILWAUKEE® M18 FUEL™ 1/2" Mid-Torque Impact Wrench w/ Friction Ring delivers the best power to weight ratio, most access in tight spaces, and faster removal speed. It provides 650 ft-lbs of nut-busting torque and only weighs 5.1 lbs, making it extremely versatile, capable of performing a wide variety of applications. Its POWERSTATE™ Brushless Motor generates the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. This battery-powered impact wrench is the most compact in its class, allowing access to stubborn fasteners in spaces where larger impact wrenches can't fit without needing to disassemble components to reach bolts. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 35 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control that delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence ensures maximum performance, protecting the tool against overloads, over-heating, and over-discharge. This kit includes (1) M18 FUEL™ 1/2" Mid-Torque Impact Wrench w/ Friction Ring, (2) M18™ REDLITHIUM™ 5.0Ah Batteries, (1) M12™/M18™ Charger, and a Contractor Bag.
Klein® D20009NEINS Heavy Duty New England Nose Cutting Plier, 1-3/8 in Nominal, 1.594 in L x 1.313 in W x 5/8 in THK Jaw Steel Jaw Knurled Jaw, 9.68 in OAL, ASTM Specified
Klein® specializes in the making of the world's finest pliers, pliers that professionals trust completely. Klein® pliers feel right and work right. They are job matched for every kind of work you do, designed and built to exceptional quality standards in a tradition that dates back to 1857.
LUFKIN FM100CME Tape Measure, 100 m L x 13 mm W Blade, Fiberglass Blade, 1/8ths, 1 cm Graduation
The Crescent Lufkin® Fiberglass Long Tapes are ideal for measuring long distances around your home or on the job. Available in multiple lengths and blade print styles, the long tapes are designed to be durable and long lasting, regardless of the application they're used for.
Leviton® 467 Pedestal Standard Lampholder, 660 W Lamp, 600 VAC, 1-Pin Fluorescent Lamp
Leviton® 7090-M 1-Circuit Lampholder, 250 W, 250 VAC, Medium Incandescent Lamp
Milwaukee® HOLE DOZER™ 49-56-0702 Hole Saw With Carbide Teeth, 3/4 in Dia, 1.62 in D Cutting, Carbide Cutting Edge, 7/16 in Arbor
The MILWAUKEE® 3/4" HOLE DOZER™ with Carbide Teeth Hole Saw features a new 3 TPI design that offers fast cuts with the durability of a bi-metal hole saw and life of a carbide hole saw. This Milwaukee hole saw provides the longest life in general purpose and extreme materials with the ability to cut through stainless steel, cast iron, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles, and more with ease. Deep gullets clear material fast while cutting, and Milwaukee's ALL-ACCESS SLOTS solve the frustration of plug removal for more productivity with less downtime between holes. The new slot design also provides increased pilot visibility for accurate placement and faster chip ejection keeping cuts cool. The HOLE DOZER™ with Carbide Teeth Hole Saw has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Milwaukee HOLE DOZER™ with Carbide Teeth Hole Saws are proudly made in the USA.
