Apex® 440-TX-27X Insert Bit, T27 Torx® Point, 1 in OAL
Apex® 440-TX-27X Insert Bit, T27 Torx® Point, 1 in OAL
-
BrandApex®
-
UPC697099274926
-
Manufacturer Part Number440-TX-27X
-
CountryUSA
-
Point SizeT27
-
Point TypeTorx®
-
MaterialSteel
-
Shank Size1/4 in
-
Shank TypeHex
-
Body Diameter0.195 in
-
Overall Length1 in
- Proprietary Steel and Heat Treat Process Yields Greater Strength and Longer Bit Life
- Cutting-edge Machining Process Results in Tighter Tolerances and Superior Product Consistency
- Better and More Consistent Fit to Fasteners Leads to Better Torque Transfer
- Reduced Diamater Nose for Limited Clearance Applications
-
UNSPSC27112814
-
Package DescriptionEACH
-
Catalog
Recently Viewed
Apex® 440-TX-27X Insert Bit, T27 Torx® Point, 1 in OAL
515730 DO-IT-BEST/LEVITON TOGGLE IVORY 20A GROUNDED QUIET DOUBLE POLE SWITCH
COMMERCIAL SPECIIFICATION GRADE. LONG-LIFE TOGGLE SWITCH WITH CAPTIVE MOUNTING SCREWS FOR FAST INSTALLATION. LARGE-HEAD TERMINAL SCREWS BACKED OUT AND STAKED FOR FAST SIDE WIRING OF UP TO NO. 10 COPPER. HEAVY-GUAGE RUST RESISTANT STEEL MOUNTING STRAP, BREAK-OFF PLASTER EARS FOR BEST ALIGNMENT. LARGE SILVER CADMIUM OXIDE CONTACTS INSURE LONG LIFE.
-JWH515730 >
Crescent® 56163 Long Key Set, 10 Pieces, 3/32 to 3/8 in Hex, Cushion T-Handle Handle, Alloy Steel, Black Oxide
Crescent® 56163 Long Key Set, 10 Pieces, 3/32 to 3/8 in Hex, Cushion Grip/T-Handle Handle, Alloy Steel, Black Oxide
Enerpac® RAC502 Single Acting Solid Plunger Spring Return Hydraulic Cylinder, 54.9 ton Advance Capacity, 3.74 in Bore, 1.97 in L Stroke, 7.32 in Retract, 1.97 in Dia Rod, 10000 psi Pressure
Enerpac® RAC502 Single Acting Solid Plunger Spring Return Hydraulic Cylinder, 54.9 ton Advance Capacity, 3.74 in Bore, 1.97 in L Stroke, 7.32 in Retract, 1.97 in Dia Rod, 10000 psi Pressure
The Crosby G-210 Straight-Side Screw Pin Chain Shackle is a reliable, high-strength rigging solution for in-line connections where space is limited. Featuring a narrow, straight-sided body and Crosby’s signature Red Pin® alloy screw pin, each shackle is forged, quenched, and tempered for strength and durability. The G-210 is hot-dip galvanized and proudly made in the USA, with the Working Load Limit (WLL) and Grade 6 permanently marked on every shackle.
This shackle is fatigue rated to 20,000 cycles at 1.5x WLL and meets or exceeds the performance requirements of ASME B30.26 and Federal Spec RR-C-271H. It is approved for use in a wide temperature range from -40°F to 400°F
Double Lip Oil Seal - Solid, 1.378 in Shaft Dia., 2.835 in OD, 0.313 in Overall Width, CRWA1 Design, Fluoro Rubber (FKM) Lip Material
