Black&Decker VSR 2500-RPM TEK SCREWDRIVER BD- DW-266
DeWALT® DW266 Depth Sensitive Heavy Duty VSR Screwdriver, 132 in-lb Torque, 120 VAC, 11-1/2 in OAL
-
BrandDeWALT®
-
UPC028875026604
-
Manufacturer Part NumberDW266
-
CountryUSA
-
Tool/KitBare Tool
-
Chuck TypeHex
-
Torque Rating132 in-lb
-
TypeDepth Sensitive Heavy Duty
-
Handle TypeErgonomic/Rubberized
-
Voltage Rating120 V AC
-
Control TypeStandard Clutch
-
Cord Type8 ft
-
Amperage Rating6.5 A
-
Housing MaterialMetal
-
Speed0 to 2500 rpm
-
Overall Length11-1/2 in
- Depth to sensitive,
- Metal gear housing for jobsite durability and increased reliability
- Rubber grip and 2-finger trigger for increased comfort and greater control
- Ideal for use with TEKS® screws
- Helical cuts heat treated steel gears for long life and durability
-
UNSPSC27112710
-
Package DescriptionEACH
-
Standards/ApprovalsUL Listed
-
Warranty3 Years
-
Warranty Information
-
Owners/User Manual
Recently Viewed
DeWALT® DW266 Depth Sensitive Heavy Duty VSR Screwdriver, 132 in-lb Torque, 120 VAC, 11-1/2 in OAL
Nickel plated brass Valve Caps with long skirt are heavy knurled dome caps. These are high heat-resistant sealing washers.
Milwaukee® 2854-20 M18™ FUEL™ Cordless Variable Compact Impact Wrench With Friction Ring, 3/8 in, 250 ft-lb Torque, 18 V, 4.8 in OAL
The MILWAUKEE® M18 FUEL™ 3/8" Compact Impact Wrench w/ Friction Ring is the most compact in its class, delivering the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. The Milwaukee cordless impact wrench measures only 4.8" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee 3/8" impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits M18™ tools, delivering more work per charge and more work over the life of the pack.
55-TON 13"-STROKE SHOP PRESS WITH ELECTRIC PUMP - OMGIEP5513>
For materials up to 3/16 in. these Carbide tipped sheet metal hole saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the Carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2 in. diameter.
This 26-inch wide 4-Drawer Tool Chest is constructed of all-steel for strength and durability. It has four, 50-pound load capacity, full-extension ball-bearing drawer slides, and a keyed internal locking system to safeguard tools. Gas struts also provide easy lid opening and closing. Recommended with this unit is our 100 Series 26 in. W 2-Drawer Middle Chest (STST22621BK) and 100 Series 26 in. W 4-Drawer Rolling Cabinet (STST22742BK), sold separately. Look no further than our 100 Series Metal Tool Storage line for your home garage tool storage and organization needs. Choose from a variety of sizes in top and middle tool chests, rolling tool cabinets, and mobile workbenches, all made of 20-24 gauge steel with black steel drawer trims.
