Ingersoll-Rand 7802RA General Duty Reversible Air Drill, 3/8 in Keyed/Standard Chuck, 1/2 hp, 4 cfm Average/26 cfm at Load Air Flow, 90 psi, 7.4 in OAL
Ingersoll-Rand 7802RA General Duty Reversible Air Drill, 3/8 in Keyed/Standard Chuck, 1/2 hp, 4 cfm Average/26 cfm at Load Air Flow, 90 psi, 7.4 in OAL
-
BrandIngersoll Rand
-
UPC663023001869
-
Manufacturer Part Number7802RA
-
CountryUSA
-
Throttle StyleTrigger
-
Tool/KitBare Tool
-
Chuck Size3/8 in
-
Chuck TypeKeyed/Standard
-
Minimum Hose Size3/8 in
-
TypeGeneral Duty Reversible
-
ReversibleYes
-
Handle TypePistol Grip
-
Air Flow Rate4 cfm Average/26 cfm at Load
-
Air Inlet1/4 in NPTF
-
Air Pressure90 psi
-
Horsepower1/2 hp
-
Housing MaterialAluminum
-
Sound Level82 dBA
-
Speed2000 rpm
-
Overall Length7.4 in
- Performance - 2.65 in-lb Torque, 0.5 HP and 2000 RPM
- Reversible, Allows you to choose between forward and reverse
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 5KB23 |
| Fastenal | 1591-7802R |
| Ferguson | I7802RA |
-
UNSPSC27131505
-
IncludesChuck Key
-
Warranty1 Year
-
Catalog
-
Instruction/Installation Manual
-
Owners/User Manual
-
Full Engineering Drawing
-
Line Drawing
Recently Viewed
Ingersoll-Rand 7802RA General Duty Reversible Air Drill, 3/8 in Keyed/Standard Chuck, 1/2 hp, 4 cfm Average/26 cfm at Load Air Flow, 90 psi, 7.4 in OAL
Ingersoll-Rand 7802RA General Duty Reversible Air Drill, 3/8 in Keyed/Standard Chuck, 1/2 hp, 4 cfm Average/26 cfm at Load Air Flow, 90 psi, 7.4 in OAL
Browning® 764089 SPS-S200 Normal Duty Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 4-5/8 to 5-3/8 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-9/16 in OAL x 3-45/64 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
DeWALT® Screw-Bolt™ PFM1411060 1-Piece Heavy Duty High Performance Screw Anchor, 1/4 in Dia, 2-1/4 in OAL, Hex Washer Head Drive, Carbon Steel, 1 in D Min Embedment
The Screw-Bolt™ anchor is a 1-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt™ is available as bright zinc plated or mechanically galvanized plating. Suitable base materials include normal weight concrete.
Browning® 764086 SPS-S200 Normal Duty Pillow Block Ball Bearing Unit, 1-3/16 in Dia Bore, 4-7/16 to 5-3/32 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 6-1/2 in OAL x 3-17/64 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
WATTS® Maxi-Flo® 0555180 Silent Check Valve, 2 in Nominal, Thread End Style, Cast Copper Silicon Alloy Body
This 2 inch lead free Maxi-Flo check valve is used in general industrial and plumbing applications to prevent the effects of water hammer in the piping system. It provides a silent operation with low pressure drop and can be installed horizontally or vertically. This valve consists of a lead free brass body, lead free brass check and adapter, conical lead free brass disc, PTFE seat and threaded end connections. The maximum working pressure rating is 400 psi (27.6 bar), WOG non-shock at minus 20 to 100 degrees F (minus 29 to 38 degrees C) and 15 psi (1 bar) WSP at 250 degrees F (121 degrees C).
Ingersoll Rand 2A2SA A Series Industrial Duty Air Chipping Hammer, 0.68 in Opening Round Shank, 16 in OAL, Standard Retainer
Whether you’re working in construction or demolition, the A Series chipping hammers are great for any job. With its incredible power-to-weight ratio, these hammers will increase productivity and make working easy.
