Milwaukee® 5378-20 Dual Torque Corded Hammer Drill, 1/2 in Keyed Chuck, 120 VAC, 13 in OAL
The power to drill 1/2 in. holes in concrete. The versatility to excel at wood and steel applications. This powerful 7.5 amp, 1/2 in. hammer drill features dual trigger speed control in two ranges, with more power for the toughest applications or more speed and less torque for lighter applications. Use it for drilling in wood with flat boring bits, hole saws, auger bits and Selfeed bits, or in steel with twist bits and in concrete with percussion bits. The removable side handle helps set the depth rod for pre-set hole drilling. The heavy-duty metal gear case withstands daily jobsite use, yet the drill's lightweight, balanced pistol-grip design reduces fatigue during a long work day.
-
BrandMilwaukee®
-
UPC045242025466
-
Manufacturer Part Number5378-20
-
CountryUSA
-
Tool/KitKit
-
Chuck Size1/2 in
-
Chuck TypeKeyed
-
Torque Rating19.9 ft-lb
-
TypeDual Torque
-
ReversibleYes
-
Handle TypePistol Grip/Side
-
Voltage Rating120 V AC
-
Control TypeTrigger Lock Switch
-
Cord TypeFixed
-
Amperage Rating7.5 A
-
Housing MaterialMetal
-
Impact Energy2.5 ft-lb
-
Number of Speeds2
-
Speed0 to 1350/0 to 2500 rpm
-
Blows per Minute0 to 20000/0 to 40000 bpm
-
Overall Length13 in
- Powerful 7.5 A dual-torque motor - optimized for concrete fastening with overload protection, choose trigger-speed control in two ranges - 0 to 1350 rpm/0 to 22000 bpm or 0 to 2500 rpm/0 to 40000 bpm
- 2-mode operation - drill-only mode for wood, steel and plastic, hammer and rotation setting easily sets concrete screw fasteners and drills small holes for anchors
- 2-speed gear box - select the correct drilling speed for the material and accessory
- Self-stopping brushes - protects the motor and increases the life of the tool
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | PD50537820 |
| Berkshire eSupply | PD50537820 |
| Berkshire eSupply | PD50537820 |
-
Alternative Part Number8565263
-
UNSPSC27112703
-
IDEA Index ID8565263
-
IncludesChuck Key
-
Package Description1/PK
-
Standards/ApprovalsCSA Certified|UL Listed
-
Warranty5 years
-
Owners/User Manual
-
Full Engineering Drawing
Recently Viewed
Milwaukee® 5378-20 Dual Torque Corded Hammer Drill, 1/2 in Keyed Chuck, 120 VAC, 13 in OAL
The power to drill 1/2 in. holes in concrete. The versatility to excel at wood and steel applications. This powerful 7.5 amp, 1/2 in. hammer drill features dual trigger speed control in two ranges, with more power for the toughest applications or more speed and less torque for lighter applications. Use it for drilling in wood with flat boring bits, hole saws, auger bits and Selfeed bits, or in steel with twist bits and in concrete with percussion bits. The removable side handle helps set the depth rod for pre-set hole drilling. The heavy-duty metal gear case withstands daily jobsite use, yet the drill's lightweight, balanced pistol-grip design reduces fatigue during a long work day.
GEARWRENCH® 86850 Stubby Length Wrench Set, 10 Pieces, 10 to 19 mm, Polished Chrome
The GEARWRENCH 90 Tooth combination stubby ratcheting wrenches feature a 4 degree ratcheting arc vs. 30 degree on a standard combination wrench increasing productivity. These wrenches offer up to 60% greater access than the original GEARWRENCH ratcheting wrenches thanks to an optimized beam and smaller open and box end. These wrenches also feature off-corner loading for better grip and reduced fastener rounding. The wrenches have a sleek head design allowing access to tight spots where a ratchet would not fit.
GEARWRENCH® 81909 Crowfoot Non-Ratcheting Wrench Set, 10 Pieces, 10 to 17 mm, Polished Chrome
The GEARWRENCH Crowfoot Wrenches provide improved access to nuts and bolts located in hard to reach places or confined spaces. Used with an extension, these wrenches allow you to avoid obstructions which limit access or prevent the use of a ratchet, so you can get the job done.
Proto® J47000CF Anti-Slip Crowfoot Wrench Set, 6 Pieces, 1/4 to 9/16 in, Full Polished
Proto® J47000CF Anti-Slip Crowfoot Wrench Set, 6 Pieces, 1/4 to 9/16 in, Full Polished
Wilton® WL9-14243 Spark-Duty™ 400P Deep Throat Regular Duty C-Clamp, 3-1/4 in D Throat, 0 to 4-1/4 in Clamping, 3/4 in Screw
Wilton® Spark-Duty™ 400 series c-clamps are ideal for steel fabrication and industrial welding. Each boasts drop forged construction an ACME rolled copper plated spindle to resist welding spatter, replaceable Perma-Pads® and a V-grooved anvil for secure holding of all materials.
DeWALT® DWD525K Dual Mode VSR Hammer Drill Kit, 1/2 in Keyed Chuck, 120 V AC, 13 in OAL
DeWALT® DWD525K Dual Mode VSR Hammer Drill Kit, 1/2 in Keyed Chuck, 120 VAC, 13 in OAL
