Milwaukee® M18™ FUEL™ 2737-20 Cordless Jig Saw, 18 V DC, For Blade Shank: T-Shank, 9.13 in OAL, Li-Ion Battery
The M18™ FUEL™ D-handle jig saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18™ FUEL™ D-handle jig saw leverages the POWERSTATE brushless motor and REDLINK Plus™ intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18™ REDLITHIUM™ XC5.0 battery the M18™ FUEL™ D-handle jig saw provides up to 105 linear feet of cutting in 3/4 in. laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with pin-detents at 0°; 15°; 30°; and 45° as well as an LED light and on/off blower to keep the cut line visible while cutting.
-
BrandMilwaukee®
-
UPC045242515189
-
Manufacturer Part Number2737-20
-
CountryUSA|Canada
-
For Blade Shank TypeT-Shank
-
ColorBlack/Red
-
Handle TypeD-Handle
-
Voltage Rating18 V DC
-
Control TypeElectronic Variable Speed
-
Cutting Capacity5-1/2 in
-
Housing MaterialGlass Filled Nylon
-
Bare Tool/KitBare Tool
-
Battery Capacity5 Ah
-
Battery IncludedNo
-
Battery TypeLi-Ion
-
Dimensions3.2 in W x 8.6 in H
-
Bevel Capacity45 deg
-
Stroke Length1 in
-
Strokes per Minute0 to 3500 spm
-
Overall Length9.13 in
- 4-position orbital cutting provides versatility for application-specific cutting
- LED light illuminates the cut line
- On/Off cut line blower keeps the cut line clear of debris, and allows user to turn off blower when using dust extraction
- Part of the M18 System, featuring over 150+ tools
- POWERSTATE Brushless Motor - Increased SPM and the power to cut hard materials, including hardwoods and metals
- Provides optimized performance and overload protection using total system communication between tool, battery and charger
- REDLITHIUM battery technology - superior pack construction, electronics and performance deliver more work per charge and more work over pack life than any battery on the market
- REDLINK PLUS Intelligence - the most advanced system of cordless power tool electronics, provides optimized performance and overload protection using total system communication between tool, battery and charger
- LED light illuminates the cut line
- Includes non-marring shoe cover for protection of finished surfaces
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 489P13 |
| Ferguson | M273720 |
-
Alternative Part Number14280302
-
UNSPSC27112734
-
IDEA Index ID14280302
-
Package DescriptionEACH
-
Warranty5 Year Limited Warranty
-
Owners/User Manual
Recently Viewed
Milwaukee® M18™ FUEL™ 2737-20 Cordless Jig Saw, 18 V DC, For Blade Shank: T-Shank, 9.13 in OAL, Li-Ion Battery
The M18™ FUEL™ D-handle jig saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18™ FUEL™ D-handle jig saw leverages the POWERSTATE brushless motor and REDLINK Plus™ intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18™ REDLITHIUM™ XC5.0 battery the M18™ FUEL™ D-handle jig saw provides up to 105 linear feet of cutting in 3/4 in. laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with pin-detents at 0°; 15°; 30°; and 45° as well as an LED light and on/off blower to keep the cut line visible while cutting.
Milwaukee® Hole Dozer™ hole saw features Rip Guard™, the strongest tooth form in the industry, backed by the Rip Guard™ limited lifetime tooth break warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard™ warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the job site as well as continued hole quality. The Hole Dozer™ includes Plug Jack™, an all access slot design that allows for full access during plug removal. The Plug Jack™ gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack™ increases productivity and eliminates wasted downtime between holes. For fast, tool-free change outs, use Milwaukee® universal quick-change arbors. 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100.
The first no-hub driver in the industry lets you accurately fasten upto 300 steel clamps on a single charge. The revolutionary M12™ cordless Lithium-Ion no-hub driver lets you quickly install no-hub couplings with accuracy and repeatability. Powered by the M12™ REDLITHIUM™ battery pack, it fastens upto 300 steel clamps on a single charge and is proven to be accurate for upto 25000 clamps before re-calibration is needed. It features torque settings for 60 in-lb and 80 in-lb and LED indicators for when torque limit is reached and recalibration is required.
Klein® HD502-10 Adjustable Heavy Duty Pump Plier, 1-3/4 in L Alloy Steel Jaw, 10-1/8 in OAL
Klein® HD502-10 Adjustable Heavy Duty Pump Plier, 1-3/4 in L Alloy Steel Jaw, 10-1/8 in OAL
Oatey® No. 95 Tinning Flux is a petrolatum-based flux containing tinning powder to help pre-tin the pipe. It cleans, tins and fluxes most commonly soldered metals. 100% lead-free, No. 95 Tinning Flux is NSF-listed for potable water applications. Its formula prevents copper piping turning green and is excellent for large diameter copper pipe applications. Oatey products have earned the trust of plumbing professionals for over 100 years.
Crescent® C10CV Locking Plier, 1-7/8 in Nominal, Curved Jaw, Serrated Jaw Surface, 10 in OAL, ASME Specified
Crescent® C10CV Locking Plier, 1-7/8 in Nominal, Curved Jaw, Serrated Jaw Surface, 10 in OAL, ASME Specified











