Milwaukee 18-VOLT D-HANDLED JIGSAW KIT MWK 2737-21
The M18™ FUEL™ D-handle jig saw combines power, blade speed and precision, to deliver quality cuts in a wide variety of materials and applications. Equipped with Milwaukee® POWERSTATE™ brushless Motor and REDLINK™ PLUS Intelligence, the M18™ FUEL™ D-handle Jig Saw provides higher blade speed than corded jig saws at 3500 strokes per minute, minimizing chipping or bucking for clean controlled cuts. With the M18™ REDLITHIUM™ XC5.0 battery, the saw is capable of cutting upto 105 linear feet of 3/4 in laminated particle board, delivering all-day productivity with less trips to the charger. The M18™ FUEL™ D-handle Jig Saw features a variable speed two finger trigger, toolless blade change and bevel adjust and an integrated LED light with on/off blower to maximize cutline visibility.
-
BrandMilwaukee®
-
UPC045242515226
-
Manufacturer Part Number2737-21
-
CountryUSA
-
For Blade Shank TypeT-Shank
-
ColorBlack/Red
-
Handle TypeD-Handle
-
Voltage Rating18 V DC
-
Control TypeElectronic Variable Speed
-
Cutting Capacity5-1/2 in
-
Housing MaterialGlass Filled Nylon
-
Bare Tool/KitKit
-
Battery Capacity5 Ah
-
Battery IncludedYes
-
Battery TypeLi-Ion
-
Dimensions3.2 in W x 8.6 in H
-
Bevel Capacity45 deg
-
Stroke Length1 in
-
Strokes per Minute0 to 3500 spm
-
Overall Length9.13 in
- Higher blade speed than corded jig saws for clean controlled cuts
- Power to cut hard materials including hardwoods and metals
- Part of the M18™ system, featuring over 150 plus tools
- POWERSTATE™ brushless motor - increased SPM and the power to cut hard materials, including hardwoods and metals
- REDLINK PLUS™ intelligence the most advanced system of cordless power tool electronics provides optimized performance and overload protection using total system communication between tool, battery and charger
- REDLITHIUM™ battery technology superior pack construction, electronics and performance deliver more work per charge and more work over pack life than nay battery on the market
- 4-position orbital cutting provides versatility for application specific cutting
- Tool free shoe bevel with positive stops allows for quick and accurate shoe adjustment with pin-detents at 0, 15, 30 and 45 deg
- Variable speed trigger between 0 and 3500 strokes per minute, providing precise control for clean cuts with less chipping
- On/off cut line blower keeps the cut line clear of debris and allows user to turn off blower when using dust extraction
- Accepts T-shank jig saw blades
- Toolless shoe bevel with positive stops allows for quick and accurate shoe adjustment with detents at 0, 15, 30 and 45 deg
- LED light illuminates the cut line
- Includes non-marring shoe cover for protection of finished surfaces
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 489P14 |
-
Alternative Part Number14280303
-
UNSPSC27112734
-
IDEA Index ID14280303
-
Package Description1/PK
-
Owners/User Manual
-
SDS
Recently Viewed
The M18™ FUEL™ D-handle jig saw combines power, blade speed and precision, to deliver quality cuts in a wide variety of materials and applications. Equipped with Milwaukee® POWERSTATE™ brushless Motor and REDLINK™ PLUS Intelligence, the M18™ FUEL™ D-handle Jig Saw provides higher blade speed than corded jig saws at 3500 strokes per minute, minimizing chipping or bucking for clean controlled cuts. With the M18™ REDLITHIUM™ XC5.0 battery, the saw is capable of cutting upto 105 linear feet of 3/4 in laminated particle board, delivering all-day productivity with less trips to the charger. The M18™ FUEL™ D-handle Jig Saw features a variable speed two finger trigger, toolless blade change and bevel adjust and an integrated LED light with on/off blower to maximize cutline visibility.
The MILWAUKEE® M18 FUEL™ 3/8" Compact Impact Wrench w/ Friction Ring Kit is the most compact in its class, delivering the most access in tight spaces, up to 250 ft-lbs of nut-busting torque, and maximum workspace visibility. The Milwaukee cordless impact wrench measures only 4.8" in length with a POWERSTATE™ Brushless motor to provide the power to remove stubborn fasteners, even in confined spaces. The Milwaukee 3/8" impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL™ offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS™ Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The included M18™ REDLITHIUM™ 5.0Ah battery pack fits M18™ tools, delivering more work per charge and more work over the life of the pack. This kit includes (1) M18 FUEL™ 3/8" Compact Impact Wrench w/ Friction Ring, (2) M18™ 5.0Ah Batteries, (1) M12™/M18™ Charger, and a Carrying Case
The Milwaukee 0779 28 Volt 1/2 in. impact wrench delivers 325 ft. lbs of maximum torque. Powering the 0779 is the revolutionary 28 Volt lithium-ion battery pack exclusively from Milwaukee. Combining high torque with 1,450 RPM and 2,450 ipm, the 0779 provides the power, speed and run-time to drive larger lags, drill bigger holes, and remove larger nuts. The powerful Milwaukee 28 V motor makes breaking loose stuck nuts a breeze. The heavy-duty magnesium mechanism housing provides extreme job-site durability. The 0779 comes equipped with comfortable non-slip, soft-grip surfaces that reduce vibration and fatigue. The forward/reverse shuttle is conveniently located above the variable speed switch for fast, easy access. Designed for heavy-duty use, whether driving large lag screws, anchors and bolts, drilling large holes, or removing lug nuts, the 0779 provides the power, comfort and run-time to finish the job. A heavy-duty steel ring (included) can be attached for convenient tethering when working high overhead or for raising/lowering the tool when working from a ladder or utility pole.
No matter what the conditions require, operating at a variety of line voltages between 120 to 480 VAC, whether located in high ambient temperature environments (requiring a 90 deg C rating) or not, our family of Philips Advance Centium® ballasts are ideal for a wide variety of applications.
Milwaukee 1-1/2" V/CLEANER ASSY KITS MWK 49-90-1810
For less abusive environments where metal attachments are not required, this general purpose cleaning kit includes plastic attachments. The kit includes: 49-90-1865 chromed metal 2-piece floor wand, 49-90-1770 plastic crevice tool, 49-90-1775 6 in plastic utility nozzle, 49-90-1845 plastic 14 in squeegee insert, 49-90-1850 plastic 14 in carpet insert, 49-90-1840 plastic master floor tool, 49-90-1860 plastic round dust brush, 49-90-1855 plastic 14 in brush insert. Fits 1-1/2 in ID Hoses. All inserts snap lock into master floor tool.
Milwaukee® 3601-20 Compact Brushless Drill, 1/2 in Chuck, 18 V, 1700 rpm No-Load, 5.7 in OAL, Li-Ion Battery
The MILWAUKEE® M18™ ½” Compact Brushless Drill/Driver is more compact with faster speed in application. The compact drill is 5.7” in length and lightweight at 2.3 lbs without battery allowing for excellent control, especially while working in overhead or tight spaces. The brushless motor was built to ensure optimal tool performance delivering 550 in-lbs of torque and 0-1,700 RPM, able to tackle a wide range of drilling and fastening applications. REDLINK™ Intelligence paired with MILWAUKEE® REDLITHIUM™ M18™ batteries ensures efficient power delivery resulting in less down time recharging batteries. The compact drill has premium components with an all-metal gear case and ½” metal chuck providing durability that professionals require. The Compact Brushless ½” Drill/Driver is part of the M18™ system, fully compatible with over 250+ solutions.
