Chain Saws & Pruners Accessories
OREGON® 512959 Scrench, For Use With Chain Saws, 1/2 in x 19 mm Sockets, 2 in Barrel, Metal
OREGON® 512959 Scrench, For Use With Chain Saws, 1/2 in x 19 mm Sockets, 2 in Barrel, Metal
Milwaukee® 49-16-2732 Cordless Rust-Resistant Professional Saw Chain, For Use With Narrow Kerf Bars, 3/8 in Low Profile Pitch, Steel
The MILWAUKEE® 6" 3/8" LOW PROFILE™ Pitch, .043" Gauge Saw Chain features a full house chain that delivers smooth pruning and clean finishes. The chain is designed for controlled, low-vibration cuts. The narrow kerf, LOW PROFILE™ cutters offer more cuts per charge versus standard kerf to help maximize battery efficiency. This chain is recommended for use with the M12 FUEL™ HATCHET™ 6” Pruning Saw (2527-20) and 6" 3/8" LOW PROFILE™ Pitch, .043" Gauge Guide Bar (49-16-2733) and fits saws & narrow kerf bars of the same pitch, gauge, length, and drive links.
Recently Viewed
DOUBLE SHIELDED BALL BEARINGS-GEN62012RS>
MORSE® 14503 1385 1-Stage Type B Heavy Duty Jobber Length Aircraft Drill, #9 Drill - Wire, 0.196 in Drill - Decimal Inch, 135 deg Point, HSS
MORSE® 14503 1385 1-Stage Type B Heavy Duty Jobber Length Aircraft Drill, #9 Drill - Wire, 0.196 in Drill - Decimal Inch, 135 deg Point, HSS
BALL BEARINGS-ORS622072RS>
SPECIAL L/MOWER BALL BEARINGS-GEN850488>
DOUBLE ROW OPEN FACE BALL BEARINGS-SNR3303A>
Milwaukee® 48-20-5150 Heavy Duty Thick Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5173 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
