1-1/2"-ID X 1-5/8"-OD O-RINGS CUS 029
1-1/2" -IDX1-5/8" -OD O-RINGS
Recently Viewed
1-1/2" -IDX1-5/8" -OD O-RINGS
SADDLE BOXES-WTG121501>
1-1/4" GR-8 Split Lock Washers
SELF-CLOSING BRASS HINGES. 3/8" INSET FOR OVERLAPPING DOORS-JWH233367 >
Type S NEMA motor starters are used for full voltage starting and stopping of AC squirrel cage motors. Type S motor starters have ratings up to 810 amperes. This 3 pole NEMA Size 0 non-reversing starter has an 18 ampere rating. NEMA Size 0 motor starters have 3 phase ratings of 3 HP at 200 and 230 VAC and 5 HP at 460 and 575 VAC. This non-reversing NEMA motor starter has a melting alloy type overload relay that uses Type B thermal units to sense over current conditions. This NEMA starter has a 5 kA maximum SCCR (Short Circuit Current Rating) per UL508A when protected by an appropriate circuit breaker or fuse. Type S motor starters are available with replaceable coils in a wide variety of voltages. This starter has a 440/480 VAC 50/60 Hz operating coil wired for common control. This NEMA starter is an open device without an enclosure. This starter is 6.77 inches tall, 4.52 inches wide and 4.22 inches deep. A wide variety of accessories are available for Type S starters. Type S non-reversing NEMA motor starters are UL listed and CSA certified.
JustriteĀ® 08214 Over Protection Kit, For Use With 08205 and 08207 Funnels, 2 in NPT/NPS Bung, 3/4 in Vent, Brass
Prevent spills when transferring flammable solvents, thinners, oils or paint wastes Wide-mouth opening with hinged, stay-open lid. Built-in flame arrester prevents fire intrusion. Self-closing lid in case of fire. Galvanized steel with durable exterior epoxy powder-coat finish. Safely transfer flammable liquids into a 30- or 55-gallon (110- or 200-L) drum using this 2.6-gallon (9.8-L) capacity safety funnel that fits into a 2-in (51-mm) bung. Wide 10-3/4-in (273-mm) mouth handles rapid pouring without spills. A built-in brass flame arrester absorbs and dissipates heat preventing any external ignition source from reaching the drumās content. Self-closing cover with a fusible link, that melts at 165Ā°F (74Ā°C), automatically shuts in case of a fire. Heavy-duty 18-gauge (1-mm thick) galvanized steel construction with electrostatically applied epoxy powder-coat offers excellent durability and chemical resistance. Lid in closed position reduces vapors and accepts a lock (not included) to prevent unauthorized access. FM-Approved. EPA and OSHA compliant. For the secure transfer of flammable or non-flammable liquids into drums for manufacturing, chemical, oil, gas, and other industries.
