Milwaukee® M12™ 2132-20 Dual Power Tower Light, 12 V, LED Lamp
The MILWAUKEE® M12™ ROCKET™ Dual Power Tower Light is more portable with a 45% smaller footprint than other tower lights and offers an all-day operation. The LED tower light extends 5'8” to provide 1,400 Lumens of TRUEVIEW™ High Definition Output on high mode and 700 Lumens on low mode. The portable light tower collapses down to just 31" in length with three side handles to easily transport and store it. The LED light tower head rotates 210° and pivots 270° to cast light in any direction. The dual-powered light provides up to 10 hours of light on a single charge with an M12™ REDLITHIUM™ XC6.0 battery, but can also be plugged into an extension cord for all-day operation. The LEDs never need to be replaced and are backed by a limited lifetime warranty. Milwaukee ROCKET™ Tower Lights are designed to deploy in seconds and built to adapt to any job site environment. The LED light towers supply both task and area lighting as well as provide light overhead to reduce shadows in the workspace.
-
BrandMilwaukee®
-
UPC045242526048
-
Manufacturer Part Number2132-20
-
CountryUSA|Canada
-
Lumens1400 Lumens
-
MaterialPlastic
-
ColorBlack/Red
-
Voltage Rating12 V
-
Average Life50000 hr
-
Lamp TypeLED
- 45% smaller footprint than M18 ROCKET Tower Lights
- Collapses down to 31 in with three side handles for easy transportation and storage
- Light head rotates 210 and pivots 270 for light in any direction
- Impact resistant, reinforced legs
- Protective guard secures head during transport and storage
- Low battery indicator flashes when battery pack is low
- Part of the M12 System, featuring 100+ solutions
- 45 Percent Smaller footprint than M18 ROCKET tower lights
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 484X15 |
| Fastenal | 2173299 |
-
Alternative Part Number14818776
-
UNSPSC39111611
-
IDEA Index ID14818776
-
Package DescriptionEACH
-
Standards/ApprovalsCSA Certified|UL Listed
-
Warranty5 Year Tool Warranty, LED Limited Lifetime Warranty
-
Service Manual
-
Instruction/Installation Manual
Recently Viewed
The MILWAUKEE® M12™ ROCKET™ Dual Power Tower Light is more portable with a 45% smaller footprint than other tower lights and offers an all-day operation. The LED tower light extends 5'8” to provide 1,400 Lumens of TRUEVIEW™ High Definition Output on high mode and 700 Lumens on low mode. The portable light tower collapses down to just 31" in length with three side handles to easily transport and store it. The LED light tower head rotates 210° and pivots 270° to cast light in any direction. The dual-powered light provides up to 10 hours of light on a single charge with an M12™ REDLITHIUM™ XC6.0 battery, but can also be plugged into an extension cord for all-day operation. The LEDs never need to be replaced and are backed by a limited lifetime warranty. Milwaukee ROCKET™ Tower Lights are designed to deploy in seconds and built to adapt to any job site environment. The LED light towers supply both task and area lighting as well as provide light overhead to reduce shadows in the workspace.
S-80 PVC-NIBPVCP801000>
IKO IRB1012 Inch Series Inner Ring, 5/8 in ID x 7/8 in OD, 19.43 mm OAW, For Use With BA1412Z/BHA1412Z and YB1412 Shell Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. These rings are designed to provide a durable surface for shell-type needle roller bearings with non-machined raceways in-type IRB series shaft diameters range from 5/16 to 2-1/2 in.
3.5-LB FIBERGLASS HANDLE SINGLE BIT AXES
3/8" X 1-1/4" USS GR-5 Plow Bolts
The 7108-1 one section round rung 8 ft straight ladder is made with non-conductive fiberglass rails. Easy to transport and maneuver, these ladders bear a duty rating of 375 lb making them durable and long lasting. The slip resistant, TRACTION-TRED® rungs are round, and the durable rail shields and shoe brackets help to protect the rails from damage. The plate and rung assemblies are riveted at four points to the side rails.
