Energizer® 1259 Industrial 2D Mine Safety Light, PR2/PR6 Bulb, 11.4 Lumens
MSHA approved for use in methane-air mixture and UL listed for Division I and II, class I, Group C and D environments. For use in gas-air mixtures of acetone, butane, benzene, diethyl ether, ethyl and methyl alcohols, gasoline, methane (natural gas), naphtha and propane. Approved also for use in dust-air mixtures of class II, Group G. Designed so that if lamp is broken, electrical circuit will be opened before filament can ignite these flammable or explosive gas-air mixtures in the surrounding atmosphere.
-
BrandEnergizer®
-
UPC039800013460
-
Manufacturer Part Number1259
-
CountryUSA
-
Lumens11.4 Lumens
-
ColorSafety Orange
-
Type2D Mine
-
Voltage Rating3.6 V
-
Amperage Rating0.5 A
-
Number of Batteries2
-
SeriesIndustrial
-
Average Life15 hr
-
Battery TypeD Alkaline
-
Dimensions60 mm Dia x 203 mm L
-
Bulb TypePR2/PR6
- Will not cause an explosion in certain ignitable gas air and dust-air atmospheres
- 7 Lumens light output with Eveready ® SHD batteries (9 Lumens with Energizer® MAX®)
- Light for 4 hours of continuous use with Eveready ® SHD batteries (21 hr with Energizer® MAX®) lifetime guarantee
- Protects user from immediate electric shock
- Without battery
-
UNSPSC39111610
-
Standards/ApprovalsANSI/NEDA 13D or 13|UL Listed|MSHA Approved|CSA Certified
-
Specification Sheet
Recently Viewed
Energizer® 1259 Industrial 2D Mine Safety Light, PR2/PR6 Bulb, 11.4 Lumens
MSHA approved for use in methane-air mixture and UL listed for Division I and II, class I, Group C and D environments. For use in gas-air mixtures of acetone, butane, benzene, diethyl ether, ethyl and methyl alcohols, gasoline, methane (natural gas), naphtha and propane. Approved also for use in dust-air mixtures of class II, Group G. Designed so that if lamp is broken, electrical circuit will be opened before filament can ignite these flammable or explosive gas-air mixtures in the surrounding atmosphere.
POWER COLLET FOR DEWALT 625 ROUTER-JAC33841>
3/4-10X4" LEVELING PAD WITH 3" BASE-RPTTL35 >
Streamlight® 75013 XT Stinger® Handheld Flashlight, Xenon Bulb, Aluminum Housing, 90 Lumens
The Starrett English Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. These gages are Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. 8 Tapered Leaves, 1/2-1/4 x 6", inch reading, .002-.015" Range.
1/16" X 5/8" Split Roll Pins
