BANJO FITTINGS & ACCESSORIES
STEM FOR VA-200-FP VALVE
2" X 8" NOZZLE PIPE
REPAIR KIT FOR V200FP VALVE-BAJV25200 >
ANGLE END FLANGE FOR VA200FP VALVE
VALVE BODY O-RING FOR 2″ FULL PORT
Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats.
FKM seals.
Polypropylene is reinforced with fiberglass for additional strength.
Precision molded in polypropylene.
PTFE self-lubricating stem bushÂ:ings and seats cannot stick or bind.
Self-aligning ball moves freely against the PTFE seats for smoothoperation.
Stainless steel bolts.
valve opens and closes with very little pressure on the handle.
Maximum operating pressure 200 psi.
3 in. Standard Port Valve Repair Kit
V-35200 BANJO Replacement Part for 6 Bolt Ball Valves | 3" Full Port Valve | Repair Kit
Applications:
Fluids
Replacement part for use on select Banjo Valves
Repair Kits Contain the following
1 Ball
2 Ball Seats
2 Body O-Rings
1 Upper Stem Bushing
1 Thrust Washer
1 Stem O-Ring
QTY PART NO DESCRIPTION
1 V25060 VALVE STEM THRUST BEARING
1 V25160 Stem Bushing
1 V25163 #214 FKM O'RING
1 V40255 4" VALVE BALL, TUMBLED
2 V40264 4" ENDPLATE, MACHINED
2 V40265 AS568A - 259 O-RING, FKM, BLACK
45-DEG ELBOW NOZZLE VALVES-BAJVA100 >
All stainless bolts.
Angled end flange with 8" long polypropylene fill spout.
Lightweight hose end valve for convenient transfer of liquids into drums, tanks, etc.
Maximum operating pressure 225 PSI
Recently Viewed
X H-PITCHX112" TIMING BELT-JAS1120XH200 >
6 SCHEDULE-80 THREADED FLANGES
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning® 1073337 QD Bushing, 1-3/4 in Dia Bore, 3-13/16 in Dia Barrel, 6 in Dia Flange, 2.64 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL63132ZNR >
H-PITCHX42 TIMING BELT-JAS420H125 >
