BANJO HB-100 POLYPROPYLENE HOSE FITTING, ADAPTER, 1" NPT MALE X 1" BARBED
90-DEGREE ELBOW FOR CONNECTING TUBING TO A THREADED CONNECTION AT AN ANGLE. CONNECTS A HOSE ON ONE END AND A FEMALE NPT THREADED CONNECTION ON THE OTHER. GLASS-REINFORCED POLYPROPYLENE FOR RIGIDITY, LIGHTWEIGHT, DIMENSIONAL STABILITY, AND RESISTANCE TO HEAT, CORROSION, MOST CHEMICALS AND HIGH IMPACT. INTERGRAL HEX NUT FOR USING A WRENCH TO TIGHTEN THE FITTING. MAXIMUM WORKING PRESSURE OF 150 PSI AT 70 DEGREES F
- BAJHB100 >
Recently Viewed
BANJO HB-100 POLYPROPYLENE HOSE FITTING, ADAPTER, 1" NPT MALE X 1" BARBED
90-DEGREE ELBOW FOR CONNECTING TUBING TO A THREADED CONNECTION AT AN ANGLE. CONNECTS A HOSE ON ONE END AND A FEMALE NPT THREADED CONNECTION ON THE OTHER. GLASS-REINFORCED POLYPROPYLENE FOR RIGIDITY, LIGHTWEIGHT, DIMENSIONAL STABILITY, AND RESISTANCE TO HEAT, CORROSION, MOST CHEMICALS AND HIGH IMPACT. INTERGRAL HEX NUT FOR USING A WRENCH TO TIGHTEN THE FITTING. MAXIMUM WORKING PRESSURE OF 150 PSI AT 70 DEGREES F
- BAJHB100 >
Slow drying, soft set multi-purpose sealant designed for use where black is preferred. 8 oz can with brush in the cap. Conforms to TT-S-1732.
Recommended procedure for sealing pipe threads: We DO NOT recommend using pipe tape. Pipe tape enlarges the outside diameter of the male thread and may cause the female thread to split. We recommend using a pipe thread sealant. Use on clean tapered threads. Apply a thick even coat on male threads using brush applicator. For pipe diameters smaller than 1¼" apply to male threads only. For 1¼" and larger sizes apply to both male and female threads. Avoid applying excessive amounts. Hand tightens joints and then torque another ½ to ¾ turn until threads seal.
2" X 2" WYE STRAINER WITH 8" MESH POLY RIBBED STAINLESS STEEL SCREEN
THESE BANJO HOSE BARBS ARE PRECISION MOLDED IN POLYPROPYLENE AND ARE GLASS REINFORCED FOR STABILITY, STRENGTH, AND TOUGHNESS. BANJO STRAIGHT HOSE BARB HAS A 1/4" MALE NPT WITH 1/4" HOSE SHANK.
-BAJHB200 >
1-1/2" - 2" 30-MESH SCREEN FOR Y-STRAINER
DM-200-D BANJO 2" Poly Dry-Mate Female X FPT NPT With FKM Seals
Easy to use.
Economical.
Lightweight.
Maximum operating pressure 100 psi
Minimal fluid spillage.
Reduces risk of exposure.
SpillageData: 2" &mdash: 2.6 ML
Unrestricted 1½" flow.
Wide range of chemical resistance.
FKM seals.
When properly installed and operated, the assembly will not accidentally separate while fluid is flowing preventing costly mishaps.
