Oatey® 33401 Remote Placement Plug, 2 in Pipe, 5 psi Working, Natural Rubber, Import
Oatey® End-of-Pipe Gripper Plugs mechanically expand to seal the end of a pipe and hold pressure when testing a piping system. The extra large wing nut makes installation easy without tools. Oatey products have earned the trust of plumbing professionals for over 100 years.
-
BrandOatey®
-
UPC038753334011
-
Manufacturer Part Number33401
-
CountryUSA
-
Pipe Size2 in
-
MaterialNatural Rubber
-
Working Pressure5 psi
-
Domestic/ImportImport
- End-of-pipe plug seals or holds pressure to test piping system
- Plugs open-ended 2 in pipes
- Made with ABS glass-reinforced plates for added strength
- Mechanically seals only at the end of a pipe, preventing plug from falling into stack
- Rated for 17 PSI or 40 ft of head pressure
- Plastic plug body will not rust or corrode
- Natural, chemical-resistant rubber O-ring for excellent expansion and memory
- Zinc-plated steel handle
- Galvanized carriage bolt to prevent corrosion
-
UNSPSC40141700
-
Package Description1/PK
-
Standards/ApprovalsPROP65: This product contains Butadiene known to the State of California to cause cancer and birth defects or other reproductive harm-www.p65warnings.ca.gov
-
Warranty1 Year Limited
-
Warranty Information
Recently Viewed
Oatey® 33401 Remote Placement Plug, 2 in Pipe, 5 psi Working, Natural Rubber, Import
Oatey® End-of-Pipe Gripper Plugs mechanically expand to seal the end of a pipe and hold pressure when testing a piping system. The extra large wing nut makes installation easy without tools. Oatey products have earned the trust of plumbing professionals for over 100 years.
_100x100.jpg)
#6 OR 1/8" BALL CHAIN COUPLING-JWH583723>
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
Browning® 1045293 VP Series Type 1 Variable Pitch Sheave, 7/8 in Finished Bore, 3.15 in OD, 1 Groove, 1.7 to 2.5 in (3L)/2 to 3 in (A/4L)/2.5 to 3.3 in (B/5L) Dia Pitch, 21/32 to 1 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
RESILIENT TEMPERED STEEL WON'T LOSE SHAPE EVEN AFTER REPEATED USE. HOLDS MULTIPLE KEYS SECURELY
JWH581490 >
Oatey® 31310 Dauber With Polyethylene Liner, For Use With Solvent Cement And Primer
Harvey™ Siliconized Acrylic Caulk is a water-based acrylic caulk with silicone for added adhesion and low temperature flexibility. It is tack free in 30 minutes, and paintable in two hours with latex or oil-based paints. For more than 75 years, Harvey™ has offered a wide variety of products for the plumbing sector.
