Closet Flanges
Sioux Chief TKO™ 887-PM 1-Piece Open Closet Flange With Stainless Steel Swivel Ring, PVC
At Sioux Chief we design our open flanges with the same care and precision as we do the TKO. Contractors have found the open flange to be a cost effective alternative in those instances where a test cap is not needed. These include installations after the system is tested or where no testing is performed. We complement our complete line of open flanges with five different connection types, in ABS or PVC, 1-piece or with a corrosion-resistant, 430 stainless steel swivel ring.
At Sioux Chief we design our open flanges with the same care and precision as we do the TKO. Contractors have found the open flange to be a cost effective alternative in those instances where a test cap is not needed. These include installations after the system is tested or where no testing is performed. We complement our complete line of open flanges with five different connection types, in ABS or PVC, 1-piece or with a corrosion-resistant, 430 stainless steel swivel ring.
Sioux Chief TKO™ 886-4PT 1-Piece Closet Flange, 4 x 4 in Pipe, PVC, Domestic
Sioux Chief FullFlush™ 889-POM Open Offset Closet Flange With Stainless Steel Swivel Ring, PVC
Sioux Chief 889 series full flush closet flanges shall be used where necessary in drainage systems. Flange shall allow 1-1/2 in offset in any direction and have a full-swivel, corrosion-proof stainless steel ring with sufficient holes for securing to floor and slots for inserting closet bolts. Flange shall have an offset inner diameter area properly sized to allow full 3 in spherical flow for complete drainage and clog resistance. Flange shall have a 3 in SCH 40/STD hub connection which conforms to ASTM D2665 (PVC). Closet flange shall be UPC listed. Always fasten closet flanges to the floor.
Installed closet flanges shall be Sioux Chief 890 Series cast iron closet flange. Closet flange shall have three screw holes for securing to floor, and two closet bolt slots. Internal neoprene compression gasket shall create seal when lock ring is tightened via three stainless steel bolts. Flange shall have an integral neoprene test cap and be UPC listed.
Sioux Chief 490-11322 Closet Flange Floor Support
PX-70 X 1-7/8 a finished straight-bore flanged assembly used with the Dodge Para-Flex® series elastomeric tire-style shaft couplings.
1-7/8" -ID PX70 COUPLING FLANGES-DODPX70X17/8>
Oatey® 43651 Straight Open Replacement Closet Flange, 4 in Dia Inside, 4 in Pipe, Plastic/PVC
Oatey® Twist-N-Set® Replacement Closet Flanges are designed to replace broken cast iron closet flanges with a gasket that expands to fit inside of service weight, heavy weight and no hub pipe. The replacement flange installs easily without tools and features a smooth, unrestricted flow design. Oatey products have earned the trust of plumbing professionals for over 100 years.
Oatey® Fast Set™ Closet Flange quickly and easily connects a water closet outlet to a plumbing system and sits flush with the floor. Available in a variety of materials and styles, this toilet flange includes four screw holes for easy installation. The Oatey products have earned the trust of plumbing professionals for over 100 years.
CLOSET FLANGE-NIB812422>
CPVC PLUMBING COVER PLATE-JWH425613>
3/4" -FEMALE PIPE THREAD METAL GALVANIZED FLOOR FLANGES-FIT3/4GFF >
3/4-G-FF 3/4" -female Pipe Thread Galvanized Floor Flanges
3/4" -FEMALE PIPE THREAD GALVANIZED FLOOR FLANGES-JPW3/4GFF >
2" -FEMALE PIPE THREAD METAL GALVANIZED FLOOR FLANGE
2 -FEMALE PIPE THREAD GALVANIZED FLOOR FLANGES
2" SCHEDULE-80 CPVC L/R SOCKET FLANGE - NIB1854020>
1-1/2" SCH-80 CPVC SOCKET FLANGES-NIB1854015 >
CPVC FLANGES-NIB1854012>
BLIND FLANGES-NIB1853060>
SOLID FLANGES-NIB1852040>
CPVC FLANGES-NIB1852030>
CPVC FLANGES-NIB1851060>
CPVC FLANGES-NIB1851025>
2" SCH-80 CPVC SOCKET FLANGES-NIB1851020 >
Recently Viewed
Crescent® CAESET-24 eSHOCK-Guard, 24 Pieces, Blade Type : Solid Shaft/Tip Style : Phillips®/Slotted/Square/Slotted Square/Size : Slotted Square 1 2/Magnetic : Yes/Set Included Storage : alphaCASE/Rated Voltage : 1000V, S2 Steel
Protect yourself from electric shock with Crescent's new patented isolated technology, eSHOK-GUARD, providing insulation of up to 1,000 volts. Combining safety and convenience for a revolutionary experience when working around potential live wire applications, eSHOK-GUARD's impact-rated design withstands heavy-use, impact tool applications, so you never have to sacrifice protection when using power tools. With over 85% of professionals experiencing shocks on construction job sites, eSHOK-GUARD is protecting you - for life.
Crescent® CAVBHSET-55 Bit Holder Fastening Set, 55 Pieces, Tip Finish : Black Oxide/Set Included Storage : alphaCASE/Magnetic : Yes, S2 Steel
The Crescent 55 PC VORTEX(TM) Impact Driver Bit alphaCASE (TM) Set includes the patented Crescent VORTEX Bit Holder (TM) and VORTEX bits. The VORTEX Bit Holder (TM) features an exclusive Dual Impact Torsion Zone (TM) that absorbs shock, which prevents stripping screws and extends bit life. Compatible with 1/4" hex shank impact drivers and drills, the Crescent Vortex Bit Holder withstands heavy use in impact applications and prevents over-torquing of fasteners. This set also contains the Crescent VORTEX™ Fastening bits, featuring optimized tip geometry that increases fastener retention and reduces cam-out. The VORTEX (TM) bits torsion zone design delivers maximum performance in impact applications and provides extended bit life from its unique steel formulation and proprietary heat treat process. Each bit comes designed with laser etched size markings, which provide ease of identification. This alphaCASE™ set offers superior versatility and customization with pivoting, detachable rails for ease of use and organization. Its superior durability allows it to withstand heavy use on the toughest jobsites, making it a must-have accessory storage solution.
