Sioux Chief Raise-A-Ring™ 886-R Spacer/Extension Ring, ABS
Installers use Sioux Chief's spacer and repair rings to repair or adapt closet flanges for specific applications, such as when new or thicker flooring is added. The Quick Spacer™ installs under the flange, while the Raise-A-Ring™ is typically set on top of the flange, and can be stacked if necessary. For repairs to cracked or broken flanges, installers can fit Sioux Chief's stainless steel Ringer™ over the damaged flange and fasten it to the floor. Also available is a two-piece repair ring, designed to replace rusted or broken metal swivel rings without replacing the plastic portion of the flange.
-
BrandSioux Chief
-
UPC739236303424
-
Manufacturer Part Number886-R
-
CountryUSA|Canada
-
MaterialABS
-
Dimensions7/16 in THK
- Build up existing flange when added subfloor, tile, etc., leaves flange at or below floor level
- Stack rings for additional height
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | S886R |
-
UNSPSC40141700
-
Package DescriptionEACH
-
Owners/User Manual
Recently Viewed
Sioux Chief Raise-A-Ring™ 886-R Spacer/Extension Ring, ABS
Installers use Sioux Chief's spacer and repair rings to repair or adapt closet flanges for specific applications, such as when new or thicker flooring is added. The Quick Spacer™ installs under the flange, while the Raise-A-Ring™ is typically set on top of the flange, and can be stacked if necessary. For repairs to cracked or broken flanges, installers can fit Sioux Chief's stainless steel Ringer™ over the damaged flange and fasten it to the floor. Also available is a two-piece repair ring, designed to replace rusted or broken metal swivel rings without replacing the plastic portion of the flange.
Nice® 5491VMF53 5000® Round Bore Unground Flanged Radial Ball Bearing, 1/2 in Dia Bore, 1-1/8 in OD, 1 Row, 0.437 in W, 200 lb Load
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
System Plast™ VG-621S-12-58 621S Heavy Duty Cross Block With Brass Inserts
VG-621S series connects two round rods at 90 deg. VG-621S-45 series connects two round rods at 45 deg. Versions available to hold 1/2, 5/8 and 3/4 in Dia rods. Standard cross blocks come with hand knobs on each side for quick adjustment.
