Results 1 - 3 of 3
Grid

Jones Stephens™ D54100 General Purpose Floor Drain With Round Strainer, 3 x 4 in Outlet, Hub Connection, 5-3/16 in Dia Stainless Steel Grid, PVC Drain, Domestic

Sioux Chief 840 series general-purpose floor drain shall be used where necessary in drainage systems. Floor drain shall have an ABS/PVC body with SCH 40 hub connection in accordance with ASTM D2661/D2665 and connect to pipe via solvent weld joint. Strainer shall be heel-proof, 19-gauge 430 stainless steel and meet applicable load requirements for intended use.

This Watts Drains epoxy coated, cast iron floor drain is designed for finished floor areas. It features a 5 inch round, adjustable, heel-proof, nickel bronze strainer, reversible clamping collar with primary and secondary weepholes, anchor flange and 4 inch push on connection. This item carries a medium duty load rating.

Recently Viewed

Dodge® 099057 Taper-Lock® Flexible Chain Coupling Flange, 80 Chain, 3-1/4 in Bore Dia 20 Teeth, 7.3 in OD, Steel

Dodge® 99154 Rough Stock Bore Flexible Chain Coupling Flange, 80 Chain, 3-1/8 in Dia Bore, 18 Teeth, 6.66 in OD, 4.56 in Dia Hub, Steel

The MILWAUKEE® Lineman's Compact Aerial Tool Apron provides easy organization and lasting durability. The aerial tool board is designed specifically for power utility and lineman trades. It features a multi-sized auger holder that won't burn through after extended job site use. The tool apron has 18 custom pockets, including a dedicated flood light pocket, puncture-resistant knife pockets, and magnets to hold sockets in place. The tool board is constructed with durable vinyl material and features two nickel-plated brass eyelets. Built-in weep holes allow for water drainage in the pockets, and the three included D-rings provide additional storage. The aerial tool apron is designed for ultimate durability for a complete and durable storage system specifically designed for the utility trades.

My Wishlist
Compare

163 No. 0 To No. 8" Plain

Straight Pipe Wrenches
$13.68

NO. 0 TO NO. 8" PLAIN TAP WRENCH-GNL163 >

The Starrett 232 & 232M Outside Micrometer features a ratchet stop, lock nut, and carbide face. 0-1/2", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut.

Standard gage holding rod on the 657D mag base, various 657E combinations with indicators, 252 transfer stands and 665 inspection holders. Rod dimensions 3/8" x 9-1/2" (9.5 x 240mm) with clamping mechanism for gripping the indicator lug back.

If you need any additional information, prices, availability, etc. please contact us at 1-800-290-9908 or e-mail us at

Footer Menu