HCI Preferred Supplier DM-11 Combination King Hose Nipple, 1 in, Barb x MIP, Steel, Zinc Plated
HCI Preferred Supplier 973872 Combination King Hose Nipple, 1 in, Barb x MIP, Steel, Zinc Plated
-
BrandGeneric
-
UPC377339275387
-
Manufacturer Part Number973872
-
CountryUSA
-
FinishZinc Plated
-
MaterialSteel
-
Fitting/Connector TypeCoupling
-
Nominal Size1 in
-
Dimensions1-1/32 in Dia
-
Domestic/ImportImport
-
Length4-1/32 in
-
End StyleBarb x MIP
- Hose mender for repairing hoses
- Connects to a hose on both ends
- Zinc plated steel for greater corrosion resistance than unplated steel
- Barbed fitting for a tight seal on hoses
- Not for compressible products such as air, nitrogen, or steam
- For use with a hose clamps or crimp sleeve or ferrule
- Menders are not for compressible products such as air, nitrogen or steam
- The working pressure may vary with the construction of the hose, the type of clamping system used and the application
- In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | DDM11 |
-
UNSPSC40141734
-
Package Description1/PK
-
WarrantyLimited
-
Catalog
Recently Viewed
HCI Preferred Supplier DM-11 Combination King Hose Nipple, 1 in, Barb x MIP, Steel, Zinc Plated
HCI Preferred Supplier 973872 Combination King Hose Nipple, 1 in, Barb x MIP, Steel, Zinc Plated
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
Dixon® HAS10 Tridon Gear Clamp, 9/16 to 1-1/16 in Clamp, Stainless Steel Band, 410 Stainless Steel Bolt
Dixon® HAS10 Tridon Gear Clamp, 9/16 to 1-1/16 in Clamp, Stainless Steel Band, 410 Stainless Steel Bolt
24-MJIC X 20-MJIC HYD/ADAPTERS-DAY24032420>
Kuri Tec® 220-0562x15C Tubing, 0.188 in Nominal, 1500 ft L, 150 psi Working, Polyethylene, Import
Kuri Tec® 220-0562x15C Tubing, 0.188 in Nominal, 1500 ft L, 150 psi Working, Polyethylene, Domestic
Coilhose® BS04 Hose Splicer, 1/4 in Nominal, Barb End Style, Brass, Domestic
