Dixon® PPA50 Type A Cam and Groove Adapter, 3/4 x 1/2 in, Male Adapter x FNPT, Polypropylene
Dixon® PPA50 Type A Cam and Groove Adapter, 3/4 x 1/2 in, Male Adapter x FNPT, Polypropylene
-
BrandDixon®
-
Manufacturer Part NumberPPA50
-
CountryUSA
-
MaterialPolypropylene
-
Fitting/Connector TypeAdapter
-
Pressure Rating125 psi
-
TypeType A
-
Nominal Size3/4 x 1/2 in
-
Dimensions1-1/4 in Dia
-
Length1-5/8 in
-
End StyleMale Adapter x FNPT
- Manufactured from a glass-filled polypropylene
- 1/2 in couplers and adapters will interchange with 3/4 in couplers and adapters, only the threads and barbs are 1/2 in
- 1-1/4 in couplers and adapters will interchange with 1-1/2 in couplers and adapters, only the threads and barbs are 1-1/4 in
- Polypropylene cam and groove should not be mixed with metal fittings
- Under no circumstances should cam and groove couplings be used for compressed air or steam service!
- Pressure rating is based on the seal of the mating part
- Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70 deg F with a standard seal installed
- Not recommended for use with PTFE gaskets
- 125 psi at ambient temperature 70 deg F pressure
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
| Competitor Name | Cross-Reference Number |
|---|---|
| Ferguson | DPPA50 |
-
UNSPSC40141734
-
Package Description25/BX
-
WarrantyLimited
-
Catalog
Recently Viewed
Dixon® PPA50 Type A Cam and Groove Adapter, 3/4 x 1/2 in, Male Adapter x FNPT, Polypropylene
Dixon® PPA50 Type A Cam and Groove Adapter, 3/4 x 1/2 in, Male Adapter x FNPT, Polypropylene
Dixon® SF250F Open Snoot Pin Lug Adapter, 2-1/2 in, FNPT x NST
Dixon® STBC1000 T-Bolt Clamp, 9.75 to 10.06 in Nominal, 0.025 in THK, 300 Stainless Steel, Domestic
Dixon® STBC1000 T-Bolt Clamp, 9.75 to 10.06 in Nominal, 0.025 in THK, 300 Stainless Steel, Domestic
Dixon® STBC1200 T-Bolt Clamp, 11.75 to 12.06 in Nominal, 0.025 in THK, 300 Stainless Steel, Domestic
Dixon® STBC1200 T-Bolt Clamp, 11.75 to 12.06 in Nominal, 0.025 in THK, 300 Stainless Steel, Domestic
Dixon® SM250F Pin Lug Adapter, 2-1/2 in, MNPT x Female NST
Coilhose® 6-204 Moldflow Straight Unvalved Barb Coupler, 1/4 in Nominal, Brass, Domestic
The Moldflow series of couplers and connectors is designed primarily for use in cooling injection molds. They are available in valved or unvalved configurations. Engineered to interchange with other manufactures, these couplers and connectors are made from high quality brass with stainless steel balls, stainless steel valves and springs, and silicone seals.
