Dixon® 4DF3-B D Series Automatic Interchange Pneumatic Coupler, 1/2 x 3/8 in Nominal, Quick-Connect x FNPT, 500 psi Pressure, Brass
Dixon® 4DF3-B D Series Automatic Interchange Pneumatic Coupler, 1/2 x 3/8 in Nominal, Quick-Connect x FNPT, 500 psi Pressure, Brass
-
BrandDixon®
-
Manufacturer Part Number4DF3-B
-
CountryUSA
-
Temperature Rating-40 to 250 deg F
-
FinishPolished Chrome
-
MaterialBrass
-
Pressure Rating500 psi
-
TypeAutomatic Interchange
-
Nominal Size1/2 x 3/8 in
-
Hex Size1-1/16 in
-
SeriesD Series
-
Dimensions1.38 OD
-
Length3.1 in
-
End StyleQuick-Connect x FNPT
- Machined components are manufactured using solid bar stock
- Stainless steel balls, retaining rings and springs maximize corrosion resistance and extend service life
- Nitrile seals are standard
- Steel prong valve
-
UNSPSC40183100
-
Package Description5/BX
-
Standards/ApprovalsRoHS Compliant
Recently Viewed
Dixon® 4DF3-B D Series Automatic Interchange Pneumatic Coupler, 1/2 x 3/8 in Nominal, Quick-Connect x FNPT, 500 psi Pressure, Brass
Dixon® 4DF3-B D Series Automatic Interchange Pneumatic Coupler, 1/2 x 3/8 in Nominal, Quick-Connect x FNPT, 500 psi Pressure, Brass
HCI Preferred Supplier 44103LF Imperial 90 deg Pipe Elbow, 1/2 in Nominal, Bronze
HCI Preferred Supplier 44103LF Imperial 90 deg Pipe Elbow, 1/2 in Nominal, Bronze
DOUBLE SEALED BALL BEARING-NTNR12LLUC3/L627 >
Crescent® R27CV 4-Position Tongue and Groove Plier, ASME B107.23M-2004, 1-5/16 in Nominal, Alloy Steel Straight Jaw, 7 in OAL
Crescent® R27CV 4-Position Tongue and Groove Plier, ASME B107.23M-2004, 1-5/16 in Nominal, Alloy Steel Straight Jaw, 7 in OAL
The Zip-It® anchor is a 1-piece self drilling anchor designed for use in gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy designed for use with No. 8 screws in 3/8 to 1 in THK wallboard. The Zip-It® Jr. is also available in engineered nylon and Zamac alloy designed for use with No. 6 screws in 3/8 to 5/8 in THK wallboard. These fasteners are not recommended for use overhead or applications where holding values are critical.
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
