Charlotte PVC 02400 1400, Tee, 1-1/2 in nominal, Socket end style, SCH 40/STD, PVC, Domestic
PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than
-
BrandCharlotte
-
UPC611942038954
-
Manufacturer Part NumberPVC 02400 1400
-
CountryUSA
-
Temperature Rating140 deg F
-
MaterialPVC
-
Fitting/Connector TypeTee
-
Pressure Rating150 psi
-
Method of ManufactureInjection-Molded
-
ColorWhite
-
Schedule RatingSCH 40/STD
-
Nominal Size1-1/2 in
-
Domestic/ImportDomestic
-
Length4-5/8 in
-
End StyleSocket
- PVC Schedule 40 fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140 F
- It is non-toxic, lightweight and easy to install
| Competitor Name | Cross-Reference Number |
|---|---|
| Ferguson | P40STJ |
-
UNSPSC40174608
-
Package DescriptionEACH
-
Standards/ApprovalsASTM D1784|ASTM D2466|NSF 14/61
-
WarrantyLimited Warranty
-
SDS
-
Warranty Information
-
Catalog
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Charlotte PVC 02400 1400, Tee, 1-1/2 in nominal, Socket end style, SCH 40/STD, PVC, Domestic
PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than
Lightweight with ample power, the 1/2 in. electromagnetic drill press motor is ideal for drilling small holes into steel. At just 8 Lbs., this lightweight 6.2 amp motor still provides plenty of power to deliver 600 RPM and produce up to 1650 Lbs. of drill point pressure with a 1 in. steel plate. This unit features a 1/2 in. chuck for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the 4202 fixed position base (sold separately) for best results.
Milwaukee LRG CUT-LEV-3 NITRILE GLOVES MWK 48-22-8972
The MILWAUKEE® Large Impact Cut Level 3 Nitrile Gloves are ANSI/ISEA Impact Level 2 Rated, and ANSI Cut Level 3 Rated. These nitrile coated gloves have impact rated enhanced TPR added to the back of the hand for added protection. The dipped gloves have a reinforced nitrile coating between the thumb and index finger for enhanced durability in high wear points. They are 18 gauge for high dexterity when handling small objects and have SMARTSWIPE™ touchscreen compatible fingertips to access devices without taking off gloves.
Moldex® 8002 8000 Probed Reusable Half Mask Respirator, M, Yolk/Cradle Suspension
Justrite® 14265 Liquid Disposal Safety Can With Stainless Steel Hardware, 2 gal Capacity, 12 in Dia, 14-3/4 in H, Polyethylene, Red, FM Approved, OSHA Approved
A better solution for the containment of liquid flammable or corrosive waste. High-density polyethylene (HDPE) disposal cans provide superior chemical resistance and leak protection. Spring-loaded sealed cap, normally closed, automatically vents between 3 and 5 psig (0.2 and 0.35 bar). Stainless steel handle and hardware with latch-catch system hold the cap in the open position for easy filling and pouring. Large-mouth opening features a built-in stainless steel flame arrester to guard against outside ignition. Current-carrying, patented carbon insert embedded in the container allows for proper grounding. The broad-base design provides stability and resists accidental tip over. Model 14265 with built-in polyethylene fill gauge indicator pops up to warn you that the container is almost full. For the safe containment and storage of liquid flammable or corrosive waste in industries like chemical and lab.
Justrite® 09700 Foot Operated Oily Waste Can, 21 gal Capacity, 18-3/8 in Dia 23-7/16 in H, Galvanized Steel, Red
Dispose of oil-soaked rags and prevent fires caused by stray sparks or spontaneous combustion. Rags and cloths soaked with solvents, thinners, linseed oil, combustible adhesives and other flammable liquids present a serious fire risk when improperly discarded. Lid opens to no more than 60 degrees and stays closed when not in use, isolating contents from fire sources and limiting oxygen to virtually eliminate the risk of spontaneous combustion. Round construction and elevated base allow circulation of air around can to disperse heat and reduce moisture build-up and rusting. Durable steel construction with a powder-coat finish provides chemical resistance. Lid opens no more than a 60º angle as required by UL. Approved by FM, UL, and TÜV. All cans carry a ten-year warranty. For the safe collection and storage of oil-soaked materials, reducing fire risks and promoting workplace safety and environmental responsibility in industries, such as automotive, manufacturing and construction.
