NIBCO 1" X 1/2" SCH-40 90-DEG PVC ELBOWS NIB 406-130
Lasco® 406-130 Reducing Elbow, 1 x 1/2 in Nominal, Slip End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
-
BrandLasco®
-
UPC025528718022
-
Manufacturer Part Number406-130
-
CountryUSA
-
Temperature Rating140 deg F
-
MaterialPVC
-
Fitting/Connector Type90 deg Elbow
-
Pressure Class125 lb
-
Method of ManufactureInjection-Molded
-
ColorWhite
-
Schedule RatingSCH 40/STD
-
Nominal Size1 x 1/2 in
-
Seal MaterialNitrile Rubber
-
Domestic/ImportDomestic
-
End StyleSlip
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM F-1970: Standard specification for special engineered fittings, appurtenances or valves for use in poly vinyl chloride (PVC) or chlorinated poly vinyl chloride (CPVC) systems
- NSF/ANSI standard 61, Annex G: Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953) NSF/ANSI Standard 14: Plastics piping system components and related materials, includes ANSI standard 61, Annex G
- Material: Lasco® SCH 40/STD fittings are produced from PVC type 1, cell classification 12454-B
- Not to be used in the hot or cold water distribution system in a dwelling maximum service temperature 140 deg F
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40172808
-
Package Description50/CTN
-
Standards/ApprovalsASTM D1784|ASTM D2466|ASTM F1970|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
WarrantyLimited
-
Specification Sheet
-
Catalog
Recently Viewed
Lasco® 406-130 Reducing Elbow, 1 x 1/2 in Nominal, Slip End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
2-1/2 inch Schedule 80 PVC 45-degree elbow fluid-control fitting. Manufactured under NIBCO’s Chemtrol brand, it features socket-by-socket (Slip x Slip) connections designed to join two lengths of PVC pipe at an angle using solvent welding.
Lasco® 850-010, 1 in nominal, MNPT end style, SCH 80/XH, PVC, Domestic
Lasco® Fittings, Inc's an Aalberts Industries company, specializes in the production and sale of injection molded fittings for Irrigation, Plumbing, Industrial, Pool/Spa and Retail markets. Lasco® Fittings, Inc. operates a 26-acre manufacturing facility in Brownsville, TN. With eight Regional Distribution Facilities strategically located within the United States, Lasco® provides worldwide distribution and overnight service.
Justrite® 14265 Liquid Disposal Safety Can With Stainless Steel Hardware, 2 gal Capacity, 12 in Dia, 14-3/4 in H, Polyethylene, Red, FM Approved, OSHA Approved
A better solution for the containment of liquid flammable or corrosive waste. High-density polyethylene (HDPE) disposal cans provide superior chemical resistance and leak protection. Spring-loaded sealed cap, normally closed, automatically vents between 3 and 5 psig (0.2 and 0.35 bar). Stainless steel handle and hardware with latch-catch system hold the cap in the open position for easy filling and pouring. Large-mouth opening features a built-in stainless steel flame arrester to guard against outside ignition. Current-carrying, patented carbon insert embedded in the container allows for proper grounding. The broad-base design provides stability and resists accidental tip over. Model 14265 with built-in polyethylene fill gauge indicator pops up to warn you that the container is almost full. For the safe containment and storage of liquid flammable or corrosive waste in industries like chemical and lab.
