Lasco® 429-025 Coupling, 2-1/2 in Nominal, Slip End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
Lasco® Fittings, Inc's comprehensive line of PVC fittings offers a variety of injection molded configurations in SCH 40/STD sizes 3/8 in through 12 in conforming to ASTM D 2466.
-
BrandLasco®
-
UPC025528724009
-
Manufacturer Part Number429-025
-
CountryUSA
-
Temperature Rating140 deg F
-
MaterialPVC
-
Fitting/Connector TypeCoupling
-
Pressure Class125 lb
-
Method of ManufactureInjection-Molded
-
ColorWhite
-
Schedule RatingSCH 40/STD
-
Nominal Size2-1/2 in
-
Seal MaterialNitrile Rubber
-
Domestic/ImportDomestic
-
Length4-1/16 in
-
End StyleSlip
- Not to be used in the hot or cold water distribution system in a dwelling maximum service temperature 140 deg F
- ASTM F-1970: Standard specification for special engineered fittings, appurtenances or valves for use in poly vinyl chloride (PVC) or chlorinated poly vinyl chloride (CPVC) systems
- Lasco® SCH 40 fittings are produced from PVC type 1, cell classification 12454-B
- NSF/ANSI standard 61, Annex G: Drinking water system components Weighted average lead content of less than or equal to 0.25% and is in compliance with California's Health and safety code Section 116875 (commonly known as AB 1953)
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40172408
-
Package Description10/CTN
-
Standards/ApprovalsASTM D1784|ASTM D2466|ASTM F1970|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
Specification Sheet
Recently Viewed
Lasco® 429-025 Coupling, 2-1/2 in Nominal, Slip End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
Lasco® Fittings, Inc's comprehensive line of PVC fittings offers a variety of injection molded configurations in SCH 40/STD sizes 3/8 in through 12 in conforming to ASTM D 2466.
9" X 11" 120-GRIT SANDPAPER ALUMINUM OXIDE
3/4" X 1/2" COPPER COUPLING WITH STOP-ELK101R3/4X1/2 >
HCI Preferred Supplier 40029 Standard Pipe Nipple, 1/4 in Nominal, 5-1/2 in L, Brass, NPT End Style
HCI Preferred Supplier 40029 Standard Pipe Nipple, 1/4 in Nominal, 5-1/2 in L, Brass, NPT End Style
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP4578-14MGT-115 9232 Synchronous Belt, 327 Teeth, 14 mm Pitch, 4578 mm OAL, 115 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
1-GAL LATEX EGGSHELL WHITE BASE-BLP233510GAL >
