NIBCO 2" X 1/2" PVC SCH-40 SXF BUSHINGS NIB 438-247
Lasco® Fittings, Inc's comprehensive line of PVC fittings offers a variety of injection molded configurations in SCH 40/STD sizes 3/8 in through 12 in conforming to ASTM D 2466.
-
BrandLasco®
-
UPC025528718893
-
Manufacturer Part Number438-247
-
CountryUSA
-
Temperature Rating140 deg F
-
MaterialPVC
-
Fitting/Connector TypeBushing
-
Pressure Class125 lb
-
Method of ManufactureInjection-Molded
-
ColorWhite
-
Schedule RatingSCH 40/STD
-
Nominal Size2 x 1/2 in
-
Seal MaterialNitrile Rubber
-
Domestic/ImportDomestic
-
Length1-11/16 in
-
End StyleSpigot x FNPT
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM F-1970: Standard specification for special engineered fittings, appurtenances or valves for use in poly vinyl chloride (PVC) or chlorinated poly vinyl chloride (CPVC) systems
- Lasco® SCH 40 fittings are produced from PVC type 1, cell classification 12454-B
- NSF/ANSI standard 61, Annex G: Drinking water system components Weighted average lead content of less than or equal to 0.25% and is in compliance with California's Health and safety code Section 116875 (commonly known as AB 1953)
- Not to be used in the hot or cold water distribution system in a dwelling maximum service temperature 140 deg F
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40172308
-
Package Description10/CTN
-
Standards/ApprovalsASTM D1784|ASTM D2466|ASTM F1970|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
Specification Sheet
Recently Viewed
Lasco® Fittings, Inc's comprehensive line of PVC fittings offers a variety of injection molded configurations in SCH 40/STD sizes 3/8 in through 12 in conforming to ASTM D 2466.
Long Flock Lined Latex Rubber Gloves 18 mil Thickness 12 Inch Length Industry Standard Grade Recessed honeycomb pattern on palm, fingers, and thumb Introducing our 5290 gloves - perfect for those who need dexterity and comfort. Made from yellow latex material with a white flock inner lining, the 5290 is 18 mil thick and 12 inches long. They feature a recessed honeycomb pattern palm for extra gripping power and a straight. The soft flock lining makes it easier to pull them on and remove them and provides moisture absorption. If you're looking for the best flock-lined rubber gloves, look no further than MCR Safety! Note: This product contains natural rubber latex which may cause allergic reaction to those with latex allergies.
Lasco® Fittings, Inc's an Aalberts Industries company, specializes in the production and sale of injection molded fittings for Irrigation, Plumbing, Industrial, Pool/Spa and Retail markets. Lasco® Fittings, Inc. operates a 26-acre manufacturing facility in Brownsville, TN. With eight Regional Distribution Facilities strategically located within the United States, Lasco® provides worldwide distribution and overnight service.
Long Flock Lined Latex Rubber Gloves 18 mil Thickness 12 Inch Length Industry Standard Grade Recessed honeycomb pattern on palm, fingers, and thumb Introducing our 5290 gloves - perfect for those who need dexterity and comfort. Made from yellow latex material with a white flock inner lining, the 5290 is 18 mil thick and 12 inches long. They feature a recessed honeycomb pattern palm for extra gripping power and a straight. The soft flock lining makes it easier to pull them on and remove them and provides moisture absorption. If you're looking for the best flock-lined rubber gloves, look no further than MCR Safety! Note: This product contains natural rubber latex which may cause allergic reaction to those with latex allergies.
2-1/2 inch Schedule 80 PVC 45-degree elbow fluid-control fitting. Manufactured under NIBCO’s Chemtrol brand, it features socket-by-socket (Slip x Slip) connections designed to join two lengths of PVC pipe at an angle using solvent welding.
Lasco® Fittings, Inc's an Aalberts Industries company, specializes in the production and sale of injection molded fittings for Irrigation, Plumbing, Industrial, Pool/Spa and Retail markets. Lasco® Fittings, Inc. operates a 26-acre manufacturing facility in Brownsville, TN. With eight Regional Distribution Facilities strategically located within the United States, Lasco® provides worldwide distribution and overnight service.
