NIB 4" X 3" SPGXS SCH-40 PVC BUSHINGS NIB 437422
Lasco® Fittings, Inc's an Aalberts Industries company, specializes in the production and sale of injection molded fittings for Irrigation, Plumbing, Industrial, Pool/Spa and Retail markets. Lasco® Fittings, Inc. operates a 26-acre manufacturing facility in Brownsville, TN. With eight Regional Distribution Facilities strategically located within the United States, Lasco® provides worldwide distribution and overnight service.
-
BrandLasco®
-
UPC025528718787
-
Manufacturer Part Number437422
-
CountryUSA
-
Temperature Rating140 deg F
-
MaterialPVC
-
Fitting/Connector TypeBushing
-
Pressure Class125 lb
-
Method of ManufactureInjection-Molded
-
ColorWhite
-
Schedule RatingSCH 40/STD
-
Nominal Size4 x 3 in
-
Seal MaterialNitrile Rubber
-
Domestic/ImportDomestic
-
Length2-3/8 in
-
End StyleSpigot x Slip
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM F-1970: Standard specification for special engineered fittings, appurtenances or valves for use in poly vinyl chloride (PVC) or chlorinated poly vinyl chloride (CPVC) systems
- Lasco® SCH 40 fittings are produced from PVC type 1, cell classification 12454-B
- NSF/ANSI standard 61, Annex G: Drinking water system components Weighted average lead content of less than or equal to 0.25% and is in compliance with California's Health and safety code Section 116875 (commonly known as AB 1953)
- Not to be used in the hot or cold water distribution system in a dwelling maximum service temperature 140 deg F
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40172308
-
Package Description5/CT
-
Standards/ApprovalsASTM D1784|ASTM D2466|ASTM F1970|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
Catalog
-
Specification Sheet
Recently Viewed
Lasco® Fittings, Inc's an Aalberts Industries company, specializes in the production and sale of injection molded fittings for Irrigation, Plumbing, Industrial, Pool/Spa and Retail markets. Lasco® Fittings, Inc. operates a 26-acre manufacturing facility in Brownsville, TN. With eight Regional Distribution Facilities strategically located within the United States, Lasco® provides worldwide distribution and overnight service.
HCI Preferred Supplier 20603 Union, 10 mm Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20603 Union, 10 mm Nominal, Push-In End Style, Brass
MCR Safety 5338S Nitri-Chem™ Industrial Grade Chemical-Resistant Gloves With Black Logo, M, Paired Hand, Nitrile, Green, Flock Lining, 13 in L, Resists: Chemical and Puncture, Unsupported Support, Straight Cuff, 18 mil THK
You said: NIBCO 817010NIBCO 817010 (often formatted as part number 817-010 or figure number 4506) is a 1-inch Schedule 80 PVC 45-degree elbow pipe fitting.It is designed for industrial, commercial, and high-pressure water system applications.
Coilhose® 770-S Pistol Grip Blow Gun, Extended Safety Tip, 150 psi Working, 1/4 in FNPT Inlet Thread, Aluminum, Import
Coilhose® 770-S Pistol Grip Blow Gun, Fixed Extended Safety Tip, 150 psi Working, 1/4 in FNPT Inlet Thread, Aluminum, Import
Lasco® 435-040 Female Adapter, 4 in Nominal, Slip x FNPT End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
