NIBCO 2-1/2" X 2" SXS SCH-40 PVC BUSHING NIB 437-292
Lasco® Fittings, Inc's an Aalberts Industries company, specializes in the production and sale of injection molded fittings for Irrigation, Plumbing, Industrial, Pool/Spa and Retail markets. Lasco® Fittings, Inc. operates a 26-acre manufacturing facility in Brownsville, TN. With eight Regional Distribution Facilities strategically located within the United States, Lasco® provides worldwide distribution and overnight service.
-
BrandLasco®
-
UPC025528724139
-
Manufacturer Part Number437-292
-
CountryUSA
-
Temperature Rating140 deg F
-
MaterialPVC
-
Fitting/Connector TypeBushing
-
Pressure Class125 lb
-
Method of ManufactureInjection-Molded
-
ColorWhite
-
Schedule RatingSCH 40/STD
-
Nominal Size2-1/2 x 2 in
-
Seal MaterialNitrile Rubber
-
Domestic/ImportDomestic
-
Length2-5/16 in
-
End StyleSpigot x Slip
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM F-1970: Standard specification for special engineered fittings, appurtenances or valves for use in poly vinyl chloride (PVC) or chlorinated poly vinyl chloride (CPVC) systems
- Lasco® SCH 40 fittings are produced from PVC type 1, cell classification 12454-B
- NSF/ANSI standard 61, Annex G: Drinking water system components Weighted average lead content of less than or equal to 0.25% and is in compliance with California's Health and safety code Section 116875 (commonly known as AB 1953)
- Not to be used in the hot or cold water distribution system in a dwelling maximum service temperature 140 deg F
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40172308
-
Package Description10/CTN
-
Standards/ApprovalsASTM D1784|ASTM D2466|ASTM F1970|NSF/ANSI 14|NSF/ANSI 61|Annex-G
-
Specification Sheet
-
Catalog
Recently Viewed
Lasco® Fittings, Inc's an Aalberts Industries company, specializes in the production and sale of injection molded fittings for Irrigation, Plumbing, Industrial, Pool/Spa and Retail markets. Lasco® Fittings, Inc. operates a 26-acre manufacturing facility in Brownsville, TN. With eight Regional Distribution Facilities strategically located within the United States, Lasco® provides worldwide distribution and overnight service.
Lasco® Fittings, Inc's comprehensive line of PVC injection molded fittings offers a variety of configurations in sizes 3/8 in through 12 in. SCH 80/XH fittings are manufactured to ASTM D 2467.
Lasco® Fittings, Inc's comprehensive line of PVC injection molded fittings offers a variety of configurations in sizes 3/8 in through 12 in. SCH 80/XH fittings are manufactured to ASTM D 2467.
The NIBCO 437-291 (NIBCO internal part number L17825YP) is a 2-1/2" x 1-1/2" PVC Schedule 40 Reducer Bushing. It is a plumbing fitting used to connect a larger 2-1/2" pipe or fitting down to a smaller 1-1/2" line. Key Technical Specifications Size Connections: 2-1/2 inch Spigot x 1-1/2 inch Slip (Socket). Connection Types: The Spigot (male) end fits directly into a 2-1/2" socket fitting, while the Slip (female) end accepts a 1-1/2" bare PVC pipe. Material & Rating: White Polyvinyl Chloride (PVC) conforming to Schedule 40 thickness standards.
Lasco® 402-071 Reducing Tee, 1/2 x 1/2 x 1/8 in Nominal, Socket x Socket x FNPT End Style, SCH 40/STD, PVC, Nitrile Rubber Seal, Domestic
Diversitech 829-995 Variable Motor Start Capacitor, 829 to 995 uF, 110/125 V AC, Round
Diversitech 829-995 Variable Motor Start Capacitor, 829 to 995 uF, 110/125 VAC, Round
