4-B-E HCI PREFERRED SUPPLIER
4" -FEMALE PIPE THREAD 90-DEGREE BLACK ELBOW-JPW4BE >
Recently Viewed
4" -FEMALE PIPE THREAD 90-DEGREE BLACK ELBOW-JPW4BE >
48X75" WATER HEATER JACKET FOR ELECTRIC OR GAS WATER HEATERS. VINYL COVERED FIBERGLASS MATERIAL WITH TAPE AND INSTRUCTIONS INCLUDED-JWH426863 >
5/16" -OD POLY TUBE (FT)-COIPE3103 >
Browning® 1296482 T55L Automatic Torque Limiter, 1 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
18/2" 6FT SPT BROWN CLAMP LAMP WITH 8.5" REFLECTOR, HEAVY DUTY REFLECTOR LIGHT, POLISHED & VENTED ALUMINUM, ON & OFF IS A PUSH THROUGH SWITCH-ECI05932 >
ASSORTED BRASS LAMP LOCKNUTS--CARD OF 12-JWH522795 >
