Hydraulic Plugs & Caps
10-MALE JIC HYDRAULIC PLUG-DAY240810 >
2-MALE JIC HYDRAULIC PLUG-DAY24082 >
24-MJIC MALE JIC HYDRAULIC PLUGS-DAY240824>
3-MALE JIC HYDRAULIC PLUG-DAY24083 >
5-MALE JIC HYDRAULIC PLUG-DAY24085 >
7/8" #14-FEMALE JIC CAPS-DAY304C14 >
1" FEMALE HYDRAULIC FEMALE JIC CAPS-DAY304C16 >
1-1/2" FEMALE HYDRAULIC JIC CAPS-DAY304C24 >
#32-FJIC 2" FEMALE HYDRAULIC CAP - DAY304C32>
1/2" FEMALE HYDRAULIC FEMALE JIC CAPS-DAY304C8 >
1" -MALE PIPE THREAD HEX HYDRAULIC PLUG-DAY540616P >
1/8" -MALE PIPE THREAD HEX HYDRAULIC PLUG-DAY54062P >
1-1/4" -MALE PIPE THREAD HEX HYDRAULIC PLUG-DAY540620P >
1-1/2" -MALE PIPE THREAD HEX HYDRAULIC PLUG-DAY540624P >
2"-MPT HYD/PIPE PLUG-DAY540632P>
1/4" -MALE PIPE THREAD HEX PIPE HYDRAULIC PLUG-DAY54064P >
1/2" -MALE PIPE THREAD HEX PIPE HYDRAULIC PLUG-DAY54068P >
3/4"-FPT HYD/PIPE CAPS-DAY5406CAP12>
1"-FPT HYD/PIPE CAPS-DAY5406CAP16>
1/8"-FPT HYD/PIPE CAPS-DAY5406CAP2>
1/4"-FPT HYD/PIPE CAPS-DAY5406CAP4>
3/8"-FPT HYD/PIPE CAPS-DAY5406CAP6>
1/2"-FEMALE PIPE THREAD HYDRAULIC PIPE CAP - DAY5406CAP8 >
24-MB MALE BOSS HYDRAULIC PLUGS-DAY640824>
Recently Viewed
Dichtomatik N70279 O-Ring, 279 Dash Number, 12.984 in ID x 13.262 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Dichtomatik 75115235 O-Ring, 225 Dash Number, 1.859 in ID x 2.137 in OD, PTFE, 55 Durometer, Import, Custom 225-TEFLON
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
50-B-28-F-1-1/2 28 Tooth Sprockets For #50
28 TOOTH SPROCKETS FOR #50 CHAIN-IDC50B28F11/2 >
18-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-18-F1-15/16
18 TOOTH SPROCKETS FOR #60 CHAIN
XL-PITCH X 9" TIMING BELTS-DAY90XL037>
