Gates #10-MJIC 1/2"-HOSE HYD/HOSE ENDS GAT 8-G-10-MJ
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
-
BrandGates® Power Transmission
-
UPC072053322972
-
Manufacturer Part Number8G-10MJ
-
CountryUSA|Canada
-
MaterialSteel
-
TypeStraight
-
Nominal Size1/2 in x 7/8-14
-
Hex Size24 mm Stem
-
SeriesG25
-
Domestic/ImportImport
-
Length2.91 in
-
End StyleHose x Male JIC 37 deg Flare
- Robust
- Low profile
- Full stem insertion
- Full length crimp
- Tested to industry leading 600000 impulse cycles
- Simplifies inventory management
- Environmentally-friendly TuffCoat™ plating for 3X better corrosion resistance than SAE standard
- 1.44 in cut-off length
-
Alternative Part NumberG25165-0810|710336225
-
UNSPSC40172601
-
Package DescriptionEACH
-
Standards/ApprovalsASTM B-117
-
WarrantyLimited
-
Catalog
-
Warranty Information
Recently Viewed
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
Dichtomatik 75183027 Extruded O-Ring Cord, 0.313 in Dia, 75 Shore A Durometer, FKM, Black, Domestic, Custom 5/16-VITON-FT
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
TIMING BELTS-JAS128XL031>
SEA BREEZE AUTO ODOR CONTROL UNIT-RBM5114>
4-7/16"-ID 4-BOLT SPHERICAL ROLLER BEARING PILLOW BLOCK - LNKPB22571YFH>
3/8"-ID NEEDLE BEARING - TORB66OH>
