HCI Preferred Supplier AM-7 Twist Claw Hose End, 3/4 in, MNPT, Ductile Iron/Malleable Iron
HCI Preferred Supplier 66007 Twist Claw Hose End, 3/4 in, MNPT, Ductile Iron/Malleable Iron
-
BrandGeneric
-
UPC822353032077
-
Manufacturer Part Number66007
-
CountryUSA
-
MaterialDuctile Iron/Malleable Iron
-
Pressure Rating150 psi
-
TypeTwist Claw
-
Nominal Size3/4 in
-
Hex Size9/16 in
-
SeriesME
-
Dimensions2-1/2 in W
-
Domestic/ImportImport
-
Length2-13/16 in
-
End StyleMNPT
-
Temperature Rating70 deg F
-
FinishZinc Plated
- Use of supplied safety clip guarantees the fittings are properly connected because the safety pin will not go through the holes in mating fittings until couplings are locked in place
- Air king meets pressure requirements as specified in A-A-59553 commercial item description superseding mil Spec.WWC-633D
- Supplied with rubber washer, part no AWR4
- Rubber seal
- Never use any air king coupling for steam service!
- The use of an air king safety clip or wire type retainer is necessary to ensure air king universal couplings will not become accidentally disconnected
- To provide protection against coupling breakage and related hazards, Dixon recommends the use of a whip hose
- 150 psi at ambient temperature 70 deg F
- Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
- Do not use in connection with drinking water
- Wash hands after handling
| Competitor Name | Competitor Part Number |
|---|---|
| Ferguson | DAM7 |
| Ferguson | DAM7 |
| Ferguson | DAM7 |
-
UNSPSC40141734
-
Package Description1/PK
-
Standards/ApprovalsISO PSI
-
Catalog
-
Specification Sheet
Recently Viewed
HCI Preferred Supplier AM-7 Twist Claw Hose End, 3/4 in, MNPT, Ductile Iron/Malleable Iron
HCI Preferred Supplier 66007 Twist Claw Hose End, 3/4 in, MNPT, Ductile Iron/Malleable Iron
MORSE® 43038 4550 Center Cutting Regular Length Single End End Mill, 1 in Dia Cutter, 1-7/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4-1/8 in OAL, Bright
MORSE® 43038 4550 Center Cutting Regular Length Single End End Mill, 1 in Dia Cutter, 1-7/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4-1/8 in OAL, Bright
HCI Preferred Supplier 2731 Two Ear Clamp, 1-1/8 in Nominal, 1.035 in Closed Dia x 1.221 in Open Dia, Stainless Steel
HCI Preferred Supplier 1510016 Two Ear Clamp, 1-1/8 in Nominal, 1.035 in Closed Dia x 1.221 in Open Dia, Stainless Steel
Morse® 116107 MHSA Advanced Hole Saw With Arbor, 5/8 in Dia, 1-15/16 in D Cutting, M42 HSS-Co 8 Cutting Edge, 1/2-20 Arbor
The all new advanced bi-metal hole saw by M.K. Morse®. Our latest sawing innovation replaces all current Morse bi-metal hole saw solutions into one, simple optimized powerhouse.
DOUBLE SEALED BALL BEARING - SKF62172RSJEM>
Koyo 32210JR Metric Series Caged Tapered Roller Bearing, 50 mm Dia Bore, 90 mm OD, 1 Row, 24.75 mm W, 85 kN Dynamic/105 kN Static Load
Tapered roller bearing are designed such that cup, cone and rollers have tapered surfaces whose apexes converge at a common point on the bearing axis. Along with metric series bearing, inch series bearing are also available. This type of bearing is suitable for applications that involve heavy or impact loading.
