NIBCO 4" SCH-80 PVC SPIGOT FLANGES NIB 856-040
856-040 Loose Ring Flange, 4 in Nominal, PVC, Socket Connection, Domestic
-
BrandLasco®
-
UPC025528764999
-
Manufacturer Part Number856-040FT
-
CountryUSA
-
Temperature Rating73.4 deg F
-
MaterialPVC
-
Pressure Rating150 psi
-
TypeLoose Ring
-
Connection TypeSocket
-
Schedule RatingSCH 80/XH
-
Nominal Size4 in
-
Domestic/ImportDomestic
- ASTM D-1784: Rigid PVC compounds and chlorinated PVC (CPVC) compounds
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
-
UNSPSC40174000
-
Package Description5/CTN
-
Standards/ApprovalsASTM D1784|ASTM D2464|ASTM D2467|ASTM F1970|ANSI B16.5|NSF Approved
-
WarrantyLimited
-
Catalog
-
Specification Sheet
Recently Viewed
856-040 Loose Ring Flange, 4 in Nominal, PVC, Socket Connection, Domestic
BBI 644660 Partially Threaded Hex Bolt, M10x1.5, 85 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
BBI 644660 Partially Threaded Hex Bolt, M10x1.5, 85 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
#12 X 2-1/2" Round Head Slotted Wood Screw
Browning® 1045491 VP Series Type 2 Variable Pitch Sheave, 7/8 in Finished Bore, 5.35 in OD, 1 Groove, 3.9 to 4.7 in (3L)/4.2 to 5.2 in (A/4L)/4.4 to 5.4 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
Browning® 1045574 VP Series Type 2 Variable Pitch Sheave, 7/8 in Finished Bore, 5.95 in OD, 1 Groove, 4.4 to 5.4 in (A/4L)/4.7 to 5.9 in (B/5L/5V) Dia Pitch, 7/8 to 1-1/4 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
#2 X 3/8" Flat Head Slotted Wood Screw
