Krylon GRAY RUST TOUGH SPRAY PRIMER--DISC KRY K-00829
Krylon® Rust Tough® K00829008 Spray Primer, 20 oz Container, Liquid Form, Gray, 25 sq-ft Coverage
-
BrandKrylon®
-
UPC724504008293
-
Manufacturer Part NumberK00829008
-
CountryUSA
-
Temperature Rating50 to 85 deg F
-
FinishFlat
-
Chemical CompositionAcetone, Toluene, Propane, Butane, Light Aliphatic Hydrocarbon Solvent, 2-Methyl-1-Propanol, Titanium Dioxide, Carbon Black
-
FormLiquid
-
ColorGray
-
VOC Content0.4541
-
Viscosity<20.5 cSt
-
Container Size20 oz
-
Container TypeAerosol Can
-
Coverage25 sq-ft
-
pH Range7
- Prime, seal and protect for maximum paint adhesion and coverage
- Smoothes uneven surfaces
- Acrylic alkyd enamel resin
- 0.81 specific gravity
- 15 oz net weight
- 15 min dry to touch
- EZ TOUCH® FANSPRAY® nozzle
- Tough, protective coating resists chipping and peeling
- Specially formulated for a variety of industrial applications
- Offering state of the art corrosion protection
- These rust-preventative acrylic alkyd enamel paints provide excellent gloss and color retention, superior durability and one-coat coverage
- Unlike other brands, rust tough can be applied direct-to-metal without a primer coating
- Save time and save money with rust tough
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 38EP39 |
-
Alternative Part NumberK00829
-
UNSPSC31211500
-
Package Description6/CS
-
Standards/ApprovalsOSHA 29 CFR 1910.1200
-
SDS
Recently Viewed
Krylon® Rust Tough® K00829008 Spray Primer, 20 oz Container, Liquid Form, Gray, 25 sq-ft Coverage
Drillco 74A132C 7400 Center Cutting Double End Imperial Stub Length Finishing End Mill, 1/2 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life.
Browning® 1045996 VP Series Type 5 Variable Pitch Sheave, 1-1/8 in Finished Bore, 5.35 in OD, 2 Grooves, 3.9 to 4.7 in (3L)/4.2 to 5.2 in (A/4L)/4.4 to 5.4 in (B/5L) Dia Pitch, 1-3/8 to 2-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
5-1/2" PULLEYS WITH 3/4"-ID-JWH337807>
metabo® 623479000 Coated Abrasive Flap Wheel, 4 in Dia, 4 in W Face, P80 Grit, Coarse Grade, Aluminum Oxide Abrasive
metabo® 623479000 Coated Abrasive Flap Wheel, 4 in Dia, 4 in W Face, P80 Grit, Coarse Grade, Aluminum Oxide Abrasive
741567 DO-IT-BEST/MIDWEST AIR TECH 6" X 44" RED STEEL SCREW-IN EARTH ANCHOR
SCREW INTO THE GROUND TO HOLD DOWN TENTS, CANOPIES, STORAGE BUILDINGS, FENCING, PLAYGROUND EQUIPMENT, TREES, PLANES, AS WELL AS HUNDREDS OF OTHER USES. NOT FOR USE ON MANUFACTURED HOMES.
-JWH741567>
