Krylon® K05872 Professional Galvanizing Primer, 16 oz, Liquid, Gray, 15 to 20 sq-ft, 15 min Curing
-
BrandKrylon®
-
UPC724504058724
-
Manufacturer Part NumberK05872
-
CountryUSA
-
Temperature Rating50 to 90 deg F
-
Chemical CompositionPropane Butane, Lt Aliphatic Hydrocarbon Solvent, Methyl Ethyl Ketone, n-Butyl Acetate, Ethylbenzene
-
FormLiquid
-
ColorGray
-
TypeProfessional
-
VOC Content563 g/L
-
Viscosity<20.5 cSt
-
Container Size16 oz
-
Container TypeAerosol Can
-
Coverage15 to 20 sq-ft
-
Curing Time15 min
-
pH Range7
- Contractor formulated primers fight against rust
- Galvanizes metal surfaces
-
UNSPSC31211507
-
Standards/ApprovalsOSHA 29 CFR 1910.1200
-
SDS
Recently Viewed
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
The Screw-Bolt+™ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
3/8"-FPT MOLDFLOW MOLD PLUGS-COI6253F>
The Screw-Bolt+™ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
