Rust-Oleum 1-GALLON NAVY GRAY EPOXY PAINT RUS 9186
This versatile epoxy coating quickly creates a tough, durable, protective surface. Just one coat of Rust-Oleum High Performance 9100 System DTM Epoxy Mastic is equal to multiple coats of a regular epoxy coating. It offers multiple activator options for unique industrial coating applications
-
BrandRust-OleumĀ®
-
UPC020066918606
-
Manufacturer Part Number9186402
-
CountryUSA
-
Temperature Rating40 to 60 deg F
-
FinishSemi-Gloss
-
Chemical CompositionEpichlorohydrin-Bisphenol A Resin, Talc (Hydrous Magnesium Silicate), Xylenes (o-, m-, p- Isomers), Titanium Dioxide, Ethylbenzene, Methyl Isobutyl Ketone, Phenol Methylstyrenated, Toluene
-
FormLiquid
-
ColorNavy Gray
-
Type2-Component
-
VOC Content<340 g/L
-
Container Size1 gal
-
Container TypeCan
-
Coverage125 to 225 sq-ft/gal
-
Series9100 System
-
Curing Time7 days
-
Base TypeSolvent
-
Odor/ScentSolvent
- The 9100 system DTM epoxy mastic is a two component, high solids, rust inhibitive epoxy coating for use in moderate to severe environments
- It is specifically designed for application directly on sound rusted steel with minimum surface preparation
- It can also be used on clean steel, galvanized metal, concrete and previously coated surfaces with proper surface preparation
- This coating is impervious to moisture and easily cleaned and sanitized
- This versatile epoxy coating quickly creates a tough, durable, protective surface
- One coat of Rust-Oleum high performance 9100 system DTM epoxy mastic is equal to multiple coats of competitive epoxy
- Direct-to-metal (DTM) self-priming formula adheres to a variety of substrates
- Superior long term resistance to solvents, chemicals, abrasion and impact
- Convenient 1:1 mixing ratio, no measuring required
- Two-year rust proof guarantee - maximum corrosion protection
- 1.357 relative density
- 34 deg C flash point
- No VOCs, no HAPs and no odor
- No VOCs, no HAPs and no odor
- Two components system - order base and activator separately
- Self-priming
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 5A277 |
-
UNSPSC31211500
-
Package Description2/PK
-
Specification Sheet
-
SDS
Recently Viewed
This versatile epoxy coating quickly creates a tough, durable, protective surface. Just one coat of Rust-Oleum High Performance 9100 System DTM Epoxy Mastic is equal to multiple coats of a regular epoxy coating. It offers multiple activator options for unique industrial coating applications
WeilerĀ® 44099 Whisk Broom, Palmetto Bristle, 7 in L Trim
TAPERED ROLLER BEARING CUP - TIM28622>
16" AFRICAN BASS BROOM HEAD - DQB08503 >
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision BrandĀ® is the only manufacturer to offer BrandedĀ® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision BrandĀ® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision BrandĀ® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
DremelĀ® 426 Reinforced Cut-Off Wheel, 1-1/4 in Dia x 0.045 in THK, 1/8 in Center Hole, 60 Grit, Fiberglass Abrasive
DremelĀ® 426 Reinforced Cut-Off Wheel, 1-1/4 in Dia x 0.045 in THK, 1/8 in Center Hole, 60 Grit, Fiberglass Abrasive
