SPRAY-ON 12-OZ SILICONE RELEASE AGENT SPR MR-315
Sprayon® S00315000 MR™ 315 General Purpose Silicone Release Agent, 16 oz Container, Liquid Form, Clear
-
BrandSprayon®
-
UPC075577903153
-
Manufacturer Part NumberS00315000
-
CountryUSA
-
Temperature Rating550 deg F
-
Chemical Composition1,1-Difluoroethane, Light Aliphatic Hydrocarbon Solvent
-
FormLiquid
-
ColorClear
-
TypeGeneral Purpose
-
VOC Content0.3954
-
Viscosity<20.5 cSt
-
Container Size16 oz
-
Container TypeAerosol Can
-
SeriesMR™ 315
-
Odor/ScentMild Solvent
- Urethane and styrene silicone release agent aerosol is a high viscosity silicone that eliminates the common problem of chemical attacks on ultra sensitive materials
- It is compatible with most moldable resins and elastomeric compounds
- High purity minimizes crazing, spotting, sticking and other causes for rejection
- Does not contain chlorofluorocarbons (CFC's) or hydrochlorofluorocarbons (HCFC's)
- Non-corrosive
- 2% silicone
- Non-flammable propellant
- <0 deg F flash point
- 0.79 specific gravity
- 3 yrs shelf life
- 12 oz net weight
-
UNSPSC31211504
-
Package Description12/PK
-
Standards/ApprovalsOSHA Compliant|NIOSH/MSHA Approved
-
SDS
Recently Viewed
Sprayon® S00315000 MR™ 315 General Purpose Silicone Release Agent, 16 oz Container, Liquid Form, Clear
ELECTRONIC FLUID OIL METERS-GRC238512 >
Talk about a multi-tasking clean-it-all. Our Clorox® disinfecting wipes remove germs, bacteria, kitchen grease and countless other nasties you find lurking in your home. That's multi-surface and multi-mess, all in one wipe.
Remke Tuff-Seal™ RSR-212 Form Size 3 Straight Cord Grip Connector With Locknut, O-Ring, 3/4 in Trade, 3, 4 Conductors, 5/8 to 3/4 in Cable Openings, Aluminum, Nickel Plated
Remke Tuff-Seal™ RSR-212 Form Size 3 Straight Cord Grip Connector With Locknut, O-Ring, 3/4 in Trade, 3, 4 Conductors, 5/8 to 3/4 in Cable Openings, Aluminum, Nickel Plated
Remke Tuff-Seal™ RSR-213 Straight Cord Grip Connector, 3/4 in Trade, 0.688 to 0.812 in Cable Openings, Aluminum
Tuff-Seal™ RSR series aluminum cord grips are UL listed and CSA certified for use in both indoor and outdoor applications to prevent cable pullout, control arc of bend and to provide a tight seal against environmental elements such as dirt, moisture and coolants. The breadth of the line encompasses conduit sizes from 1/4 to 4 in with fittings offered in machined aluminum, nickel plated aluminum, steel, stainless steel, nylon and Valox®.
The bantam plug is a plastic anchor designed for use with lightweight fixtures. It can be used in concrete, block and brick. It is also suggested for use in wallboard. Holding values in wallboard tend to be inconsistent, other wall anchors may be considered depending on the application. The bantam plug anchor is injection molded from an engineered plastic and is designed to be used in conjunction with a sheet metal or wood screw. These fasteners are not recommended for use overhead or applications where holding values are critical.

