Epoxy, Urethane & Specialty Coatings
Aervoe® 2811 Cover-Up Ink, 16 oz Container, Tan, 34 sq-ft/can Coverage, 24 hr Curing
Fast-drying, highly opaque coatings are formulated for industrial, commercial, or institutional applications where product coding, stenciling, maintenance instructions, color-coding, or covering old markings are required. Provides complete coverage in one application without running or smudging. Excellent outdoor color retention. Leaves a crisp coating that is waterproof and permanent.
CRC® 18411 Seal Coat® Dry Film Extremely Flammable Urethane Coating, 16 oz Container, Liquid/Viscous Form, Clear, 20 to 25 sq-ft Coverage, 72 hr Curing
RC 18411 (also known as Seal Coat® Clear Urethane Coating) is an extremely flammable aerosol insulating spray designed to protect electrical equipment, circuit paths, and motor windings. It seals out water and moisture while leaving a hard, durable, and flexible finish that allows for clear visualization of the surface beneath it.
CROWN 401 Insulating Epoxy Coating, 12.5 oz Container, Red, 15 min Curing
12.5-OZ RED INSULATING SPRAY EPOXY
Crown® by Aervoe® 7007G Cold Galvanizing Compound, 1 gal Container, Bulk Liquid Form, Light Gray, 48 sq-ft/can Coverage, 24 hr Curing
Crown's premium Cold Galvanize Coating 93% zinc Rich provides corrosion protection to ferrous metal surfaces; first as a long lived coating of practically pure zinc comparable to that obtained by galvanization and second, through sacrificial anodization. Both aerosol and bulk use metallic zinc dust that is 97% pure, which leaves 93% zinc in the dry film. The zinc fuses to metal substrates for protection equal to or better than hot-dipped galvanizing. This protection becomes effective when the surface is scratched, broken, or corrupted. With the presence of moisture the zinc coating will corrode while continuing to protect the metal it covers.
Crown® by Aervoe® 7007Q Cold Galvanizing Compound, 1 qt Container, Bulk Liquid Form, Light Gray, 48 sq-ft/can Coverage, 24 hr Curing
Crown's premium Cold Galvanize Coating 93% zinc Rich provides corrosion protection to ferrous metal surfaces; first as a long lived coating of practically pure zinc comparable to that obtained by galvanization and second, through sacrificial anodization. Both aerosol and bulk use metallic zinc dust that is 97% pure, which leaves 93% zinc in the dry film. The zinc fuses to metal substrates for protection equal to or better than hot-dipped galvanizing. This protection becomes effective when the surface is scratched, broken, or corrupted. With the presence of moisture the zinc coating will corrode while continuing to protect the metal it covers.
Crown® by Aervoe® 7008Q Brite Galvanizing Compound, 1 qt Container, Bulk Liquid Form, 668 sq-ft/gal Coverage, 72 hr Curing
Crown's premium Brite Galvanize Coating 65% zinc Rich is a restorative coating fortified with zinc for preventing rust and corrosion on ferrous metal surfaces. Both aerosol and bulk use metallic zinc flake that is 97% pure. The bright zinc coating will restore galvanized steel to the bright look of hot dip with 65% zinc in the dry film which meets ASTM A780 standards.
Loctite® 234926 SF 7607® Heavy Duty Rubberized Undercoating, 16 oz Container, Aerosol/Liquid Form, Black, 24 hr Curing
Loctite® 234926 SF 7607® Heavy Duty Rubberized Undercoating, 16 oz Container, Aerosol/Liquid Form, Black, 24 hr Curing
PLASTI DIP® LET14Z03 Liquid Electrical Tape, 4 oz, Liquid, Black
Liquid tape is a rubber coating that takes the place of electrical tape by providing electrical insulation to hard to reach places.
Rust-Oleum 1-GAL CHESTNUT BROWN ENAMEL PAINT RUS 5277
Rust-Oleum® 5277402 5200 System 1-Component Water Based DTM Acrylic Coating, 1 gal Container, Liquid Form, Chestnut Brown, 150 to 260 sq-ft/gal Coverage
Rust-Oleum 1-GAL CHESTNUT BROWN ENAMEL PAINT RUS 977
Rust-Oleum High Performance 7400 System 450 VOC DTM Alkyd Enamel is the original direct-to-metal (DTM) rust-preventive formula that delivers maximum protection from rust, corrosion and everyday wear and tear. This high solids coating is ideal for general plant maintenance, structural steel, machinery, equipment, pipes, railings and other industrial application projects.
Rust-Oleum 1-GAL GLOSS DUNES TAN ENAMEL PAINT RUS 865
Rust-Oleum High Performance 7400 System 450 VOC DTM Alkyd Enamel is the original direct-to-metal (DTM) rust-preventive formula that delivers maximum protection from rust, corrosion and everyday wear and tear. This high solids coating is ideal for general plant maintenance, structural steel, machinery, equipment, pipes, railings and other industrial application projects.
Rust-Oleum 1-GAL HI-GLOSS BLACK ENAMEL PAINT RUS 634
Rust-Oleum High Performance 7400 System 450 VOC DTM Alkyd Enamel is the original direct-to-metal (DTM) rust-preventive formula that delivers maximum protection from rust, corrosion and everyday wear and tear. This high solids coating is ideal for general plant maintenance, structural steel, machinery, equipment, pipes, railings and other industrial application projects.
Rust-Oleum 1-GAL HI-GLOSS WHITE ENAMEL PAINT RUS 2766
Rust-Oleum High Performance 7400 System 450 VOC DTM Alkyd Enamel is the original direct-to-metal (DTM) rust-preventive formula that delivers maximum protection from rust, corrosion and everyday wear and tear. This high solids coating is ideal for general plant maintenance, structural steel, machinery, equipment, pipes, railings and other industrial application projects.
Rust-Oleum 1-GAL INTERNAT/ORANGE ENAMEL PAINT RUS 559-402
Rust-Oleum® 559402 7400 System 1-Component DTM Alkyd Enamel Coating, 1 gal Container, Liquid Form, International Orange, 230 to 390 sq-ft/gal Coverage
Rust-Oleum 1-GAL NEW CAT YELLOW ENAMEL PAINT RUS 1547
Rust-Oleum® 1547402 1500 System 1-Component Fade-Resistant Speedy-Dry Alkyd Enamel Coating, 1 gal Container, Liquid Form, Yellow Caterpillar, 220 to 520 sq-ft/gal Coverage
Rust-Oleum 1-GAL SAFETY BLUE OIL-BASE PAINT RUS 925
Rust-Oleum High Performance 7400 System 450 VOC DTM Alkyd Enamel is the original direct-to-metal (DTM) rust-preventive formula that delivers maximum protection from rust, corrosion and everyday wear and tear. This high solids coating is ideal for general plant maintenance, structural steel, machinery, equipment, pipes, railings and other industrial application projects.
Rust-Oleum 1-GAL SAFETY GREEN OIL-BASE PAINT RUS 933
Rust-Oleum High Performance V7400 System 340 VOC DTM Alkyd Enamel is the lower-VOC version of the original direct-to-metal (DTM) rust-preventive formula. It also delivers the same trusted protection from rust, corrosion and everyday wear and tear. This high solids coating is ideal for general plant maintenance, structural steel, machinery, equipment, pipes, railings and other industrial application projects.
Rust-Oleum 1-GAL SAFETY ORANGE OIL-BASE PAINT RUS 956
Rust-Oleum High Performance 7400 System 450 VOC DTM Alkyd Enamel is the original direct-to-metal (DTM) rust-preventive formula that delivers maximum protection from rust, corrosion and everyday wear and tear. This high solids coating is ideal for general plant maintenance, structural steel, machinery, equipment, pipes, railings and other industrial application projects.
Rust-Oleum 1-GAL SAFETY YELLOW OIL-BASE PAINT RUS 944
Rust-Oleum High Performance 7400 System 450 VOC DTM Alkyd Enamel is the original direct-to-metal (DTM) rust-preventive formula that delivers maximum protection from rust, corrosion and everyday wear and tear. This high solids coating is ideal for general plant maintenance, structural steel, machinery, equipment, pipes, railings and other industrial application projects.
Recently Viewed
BrassCraft® ProCoat® CSSD54-18 P Gas Connector, 1/2 in Nominal, MNPT x FNPT End Style, 18 in L, Stainless Steel
BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.
4" -MALE PIPE THREAD BLACK COUNTER SUNK PLUG-JPW4BCP >
MCR Safety 201CL3X3 Luminator™ 201CL3 2-Piece Rainwear Coat, Unisex, 3XL, Fluorescent Orange/Lime/Silver Reflective Stripe, Polyester/PVC, Resists: Water, ASTM F903
For those applications where being seen is of the utmost importance, MCR Safety's Luminator™ series offers you a variety of high-visibility garments made in different colors and different options of reflective material.
The McGill® CAMROL® full complement needle bearings feature black oxide treated bearing steel. They are available in two basic mounting styles for use in mechanical automation or linear motion applications. Our basic features each contribute to superior performance. The LUBRIDISC® seal option helps prevent metal to metal contact within the bearing. It also provides a barrier for containment entry and blowout protection when relubricating. These bearings are available with several dimensional choices. The seal options and combinations provide a specific solution for each application. Within the following section you can learn more about these features and how they can be applied to your application.
Aervoe® 8260 1-Component Heavy Duty Cleaner and Degreaser, Aerosol Can, Liquid, Pale Yellow, Citrus
Aervoe® 8260 1-Component Heavy Duty Cleaner and Degreaser, Aerosol Can, Liquid, Pale Yellow, Citrus
3/8" X 1-3/4" USS GR-5 Plow Bolts
