SPRAY-ON APWA YELLOW U/D W/B MARKING PAINT SPR 03801
Quik-Mark™ Water-Based Inverted Marking Paint offers an advanced UV resistant formula. Our formula allows you to mark your lines during harsh or adverse conditions, even in extreme sun, Quik-Mark™ advanced UV resistant formulas will not fade to a different color! Accuracy, speed and ease of marking will keep your locators efficient and productive while lowering the overall costs of a ticket. Total marking paint performance eliminates costly remarking, clogged and wasted cans, and allows marking with confidence in any weather conditions.
-
BrandKrylon®
-
Manufacturer Part Number03801
-
CountryUSA
-
Chemical CompositionToluene, Propane, Medium Aliphatic Hydrocarbon Solvent, Butane, Light Aliphatic Hydrocarbon Solvent, Titanium Dioxide
-
FormLiquid
-
ColorUtility Yellow
-
TypeIndustrial
-
VOC Content0.56
-
Viscosity<20.5 cSt
-
Container Size17 oz
-
Container TypeCan
-
pH Range7
-
Temperature Rating70 to 80 deg F
-
Coverage664 Linear ft
-
Curing Time>10 min
- One pass valve for bold, bright, visible markings
- Glove Grip™ cap has a 50% wider opening to easily accommodate work gloves
- Spray-Thru™ cap - non-clogging spray tip
- Locking tip won't fall off with extended use
- Fast drying formula penetrates and adheres to hot, cold or wet surfaces
- <20.5 cSt at 40 deg C
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 38EL38 |
| Grainger | 38EL38 |
-
UNSPSC31211513
-
Standards/ApprovalsVOC/MIR Compliant
-
SDS
-
Specification Sheet
Recently Viewed
Quik-Mark™ Water-Based Inverted Marking Paint offers an advanced UV resistant formula. Our formula allows you to mark your lines during harsh or adverse conditions, even in extreme sun, Quik-Mark™ advanced UV resistant formulas will not fade to a different color! Accuracy, speed and ease of marking will keep your locators efficient and productive while lowering the overall costs of a ticket. Total marking paint performance eliminates costly remarking, clogged and wasted cans, and allows marking with confidence in any weather conditions.
Bando Synchro-Link® P60H150 SF Type 5 Trapezoidal Timing Belt Pulley, QD® Bore, 9.495 in OD, 9.549 in Dia Pitch, 1-13/16 in W Face
Bando Synchro-Link® Timing Belt Pulleys are manufactured to exacting tolerances to assure total drive system compatibility. They are available in a complete range of sizes, types, configurations and materials to contribute to the efficiency, economy and performance of your drive.
1/4" BRASS BULK COMPRESSION NUT-JWH478830 >
Dichtomatik N70024 O-Ring, 024 Dash Number, 1.114 in ID x 1.254 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
DOUBLE OPEN FACE BALL BEARING-GULR24 >
Dichtomatik 67025160 O-Ring, 29.4 mm ID x 35.6 mm OD, FKM, 80 Shore A Durometer, Import, Custom G-30-Vv
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
