VESTIL 60" X 60" ALUMINUM DOCKPLATES VES BTA-1400-6060
60" X 60" 14000-LB CAPACITY ALUMINUM DOCKPLATE - VESBTA14006060>
Recently Viewed
60" X 60" 14000-LB CAPACITY ALUMINUM DOCKPLATE - VESBTA14006060>
Apex® 49-A-TX-15 Power Drive Bit, T15 Torx® Point, 2-3/4 in OAL, Steel
Bussmann Edison ECNR15 Current Limiting Time Delay Fuse, 15 A, 250 V AC/125 V DC, 200 kAIC Interrupt, RK5 Class
Edison's UL Class RK5 dual-element, time-delay fuses provide economical solutions to overcurrent protectioni. Available in both 250Vac and 600Vac, with 200kA RMS Sym interrupting ratings and sizes ranging from 0 to 600 amp.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Drillco 31E140DC 3100E Adjustable Round Split Die, M14x2 Thread, 1-1/2 in OD Die, HSS
The round split adjustable die may be adjusted through the screws on the holder. Adjustment on the open type is done by turning the three screws on the holder. A die holder or handle is needed for proper operation of round split adjustable dies.
60" X 60" 10000-LB CAPACITY STEEL CURB ALUMINUM DOCKPLATE - VESTAS106060>

