Lift-All® Webmaster® 1200 EE1602DFX18 Eye and Flat Eye Web Sling, 18 ft L x 2 in W, 2400 lb, Polyester
The standard duty Webmaster® 1200 is designed as an economical sling for less frequent use.
-
BrandLift-All®
-
UPC697886268435
-
Manufacturer Part NumberEE1602DFX18
-
CountryUSA
-
Temperature Range-60 to 200 deg F
-
MaterialPolyester
-
Choker Hitch Capacity1900 lb
-
CoatingLatex
-
ColorYellow
-
TypeEye and Flat Eye
-
Vertical Hitch Capacity2400 lb
-
Web GradeLight Duty
-
Width2 in
-
Number of Plys1
-
Basket Hitch Capacity4800 lb
-
Length18 ft
-
Eye Length10 in
- Wider bearing surface per capacity helps protect load surface
- Polyester web stretches less, promotes load control
- TUFF-TAG™ for permanent identification
- The sling can be rotated to minimize wear
- TUFF-TAG™ guarantees OSHA required information lasts the life of the sling
- Always protect synthetic slings from being cut by corners and edges
- Red core warning yarns aid inspection process
- See Sling Protection section in the Lift-All catalog
- Polyester webbing stretches less for better control and the yellow treatment is resistant to abrasion, extending sling life
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 4ZT89 |
-
UNSPSC24101611
-
Package DescriptionEACH
-
Standards/ApprovalsASME B30.9|OSHA 29 CFR 1910.184|WSTDA WS-1
-
WarrantyLimited Liability Warranty
-
Technical Bulletin
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Lift-All® Webmaster® 1200 EE1602DFX18 Eye and Flat Eye Web Sling, 18 ft L x 2 in W, 2400 lb, Polyester
The standard duty Webmaster® 1200 is designed as an economical sling for less frequent use.
Lift-All® Webmaster® 1600 EE2801DFX6 Flat Eye and Type 3 Eye Web Sling, 6 ft L x 1 in W, 3200 lb, Polyester
Webmaster® 1600 is the traditional standard of heavy duty slings. The red core yarn warning system aids in the inspection process and the Yellow treatment extends sling life while also resisting abrasion.
26 8-POINT PLASTIC HANDLED HANDSAWS-JWH331694 >
Lift-All® Tuff-Edge® II Webmaster® 1600 EE2802TFX6 Eye and Eye Web Sling, 6 ft L x 2 in W, 6400 lb, Polyester
Lift-All® Tuff-Edge® III introduces a patented design with edge-cut resistance and increased abrasion. Easily inspect webbing with Edge Damage Limit (EDL) marker.
J-K-31604-S STANLEY PROTO TOOLS a professional-grade 3/16-inch keystone slotted screwdriver featuring a square shank and a DuraTek™ quad-lobe handle.
• Square Shank Advantage: The premium high-alloy steel shank is forged with a square profile rather than a round one. This design allows you to attach an adjustable wrench or open-end wrench to the flat sides of the shank to act as a torque booster for breaking loose heavily frozen or rusted screws.
• DuraTek™ Quad-Lobe Handle: The ergonomic, four-sided handle is built with shallow flutes and a 360-degree micro-textured surface to maximize hand-to-tool friction. The quad-lobe layout naturally prevents the screwdriver from rolling off slanted work tables or vehicle panels.
• Exceptional Fluid Resistance: The multicomponent handle material is specifically formulated to resist chemical breakdown and degradation from harsh aerospace and automotive chemicals, including hydraulic fluids, fuels, brake cleaners, and solvents.
• Full-Length Heat Treatment: The entire steel blade is heat-treated through its complete length to offer extreme resistance against bending, twisting, or snapping when placed under heavy structural mechanical loads.
J-P-02112-R STANLEY PROTO TOOLS a professional-grade #2 Phillips stubby screwdriver featuring a quad-lobe handle and a round shank.
• Stubby Design: With a brief 1-1/2 inch shank and a 3-1/2 inch overall length (OAL), it excels in minimal-clearance workspaces such as dashboard clusters, tight equipment panels, and appliance assemblies.
• Ergonomic Quad-Lobe Handle: The impact-resistant and chemical-resistant four-sided handle features wide but shallow flutes. This quad-lobe geometry provides 360-degree texturing for an enhanced grip, maximizes hand-to-tool torque transfer, and naturally prevents the tool from rolling away on flat surfaces.
• Vapor-Blasted Black Oxide Tip: The tip is unplated and finished in a precision-machined black oxide coating. This design ensures an exact fastener fit, significantly reduces cam-out (slipping), and completely eliminates the risk of chrome plating peeling off—a strict Foreign Object Debris (FOD) requirement for critical aerospace and industrial environments.
• Industrial Solvent Resistance: The handle material is formulated to withstand degradation from aggressive industrial fluids, including chemical cleaners and aerospace hydraulic fluids.
• Full-Length Heat-Treated Shank: The round shank is forged from high-alloy steel and heat-treated across its entire length to resist bending and twisting under extreme torque loads. It is grounded, chemically polished, and chrome-plated for heavy corrosion resistance.
