Crosby® 1016969 HR-125 Swivel Hoist Ring, 10000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.94 in Bail, 1-8 UNC Thread
Crosby® 1016969 HR-125 Swivel Hoist Ring, 10000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.94 in Bail, 1-8 UNC Thread
-
BrandCrosby®
-
Manufacturer Part Number1016969
-
CountryUSA
-
Load Capacity10000 lb
-
Thread Size1-8 UNC
-
SeriesHR-125
-
Dimensions4.87 in W
-
Swivel Angle360 deg
- Rated at 100% at 90 deg angle
- 100% Individually proof tested to 2-1/2X the working load limit with certification and statistically magnetic particle inspected
- Each product has a product identification code (PIC) for material traceability, along with the working load limit and the name Crosby® or "CG" stamped into it
- Importantly, these hoist rings meet other critical performance requirements including fatigue life, impact properties and material traceability
- Fatigue rated to 20000 cycles at 1-1/2X the working load limit
- Individually packaged along with proper application instructions and warning information
- Bolt is secured with E-clip, threads are grooved, this method allows for easy disassembly and assembly of hoist ring for thorough examination of all components
- Bolts are individually proof tested
- Top washer has the following features - the working load limit and recommended torque value are permanently stamped into each washer
- Washer is color coded for easy identification, red for UNC thread
- All threads listed are UNC
-
UNSPSC24101600
-
Standards/ApprovalsASME B30.26
-
Catalog
Recently Viewed
Crosby® 1016969 HR-125 Swivel Hoist Ring, 10000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.94 in Bail, 1-8 UNC Thread
Crosby® 1016969 HR-125 Swivel Hoist Ring, 10000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.94 in Bail, 1-8 UNC Thread
Sealmaster® gold ER bearings feature a cylindrical OD and snap ring for easy installation in a roll assembly. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
