WERNER 14" X 8'-13' 250# ADJ/EXT/PLANKS WER PA-208
The PA200 series aluminum extension planks are ideal for use on step ladders telescoping multi-ladders, extension trestle ladders and extension and single straight ladders equipped with ladder jacks. Positive stops on the plank prevent overextending. Molded thermo-plastic spacer guides allow for easy open/close action. Made of 2 in Deep box section extrusions. Heavy end flange/handles for rigidity and ease of operation. Outer flange is open for ladder jack clamps. The extruded cross members are riveted with solid aluminum rivets. Locking mechanism sets the plank in 12 in increments. 250 lb load capacity.
-
BrandWERNER®
-
UPC051751016499
-
Manufacturer Part NumberPA208
-
CountryUSA
-
Load Capacity250 lb
-
Platform Width14 in
-
MaterialAluminum
-
SeriesPA200
- For use on step ladders telescoping multi-ladders, extension trestle ladders and extension and single ladders equipped with ladder jacks
- Made of 2 in Deep box section extrusions
- Extruded cross member riveted with solid aluminum rivets
- Positive stops prevent over-extending
- Molded thermo-plastic spacer guides for easy open/close action
- Outer flange open for ladder jack clamps
- Locking mechanism sets the plank in 12 in increments
- Heavy end flange/handles for rigidity and ease of operation
- 50 lb duty rating/sq-ft
- 8 ft to 13 ft L side, 1-1/8 x 2 in inner and 1-7/8 x 2 in outer flanged rails
-
UNSPSC30191502
-
Standards/ApprovalsANSI A10.8 (2001)|OSHA Compliant
Recently Viewed
The PA200 series aluminum extension planks are ideal for use on step ladders telescoping multi-ladders, extension trestle ladders and extension and single straight ladders equipped with ladder jacks. Positive stops on the plank prevent overextending. Molded thermo-plastic spacer guides allow for easy open/close action. Made of 2 in Deep box section extrusions. Heavy end flange/handles for rigidity and ease of operation. Outer flange is open for ladder jack clamps. The extruded cross members are riveted with solid aluminum rivets. Locking mechanism sets the plank in 12 in increments. 250 lb load capacity.
13/16" 1/2"-DRIVE 6-POINT ELIMINATOR SOCKET - ARS12626>
1-1/16" 6-PT 3/8" -DRIVE DEEP SOCKET-ARS11222 >
Drillco 215A120CP 2105 Spiral Point Tap, Right Hand Cutting, Oversized 5/16-18 Thread, Plug Chamfer, 2 Flutes, Uncoated, HSS
Oversize taps are similar in design to a standard tap, but with a pitch diameter that is usually 0.0050” to 0.0055” larger than standard. Oversize taps are used primarily where a part will be plated or treated after tapping.
11/16" 1/2"-DRIVE 6-POINT ELIMINATOR SOCKET - ARS12622>
15/16" 6-PT 3/8" -DRIVE SOCKET-ARS11230 >
