WERNER 8' F/G TYPE-1AA 375# SINGLE LADDER WER 7108-1
The 7108-1 one section round rung 8 ft straight ladder is made with non-conductive fiberglass rails. Easy to transport and maneuver, these ladders bear a duty rating of 375 lb making them durable and long lasting. The slip resistant, TRACTION-TRED® rungs are round, and the durable rail shields and shoe brackets help to protect the rails from damage. The plate and rung assemblies are riveted at four points to the side rails.
-
BrandWERNER®
-
UPC051751012606
-
Manufacturer Part Number7108-1
-
CountryUSA
-
Load Capacity375 lb
-
MaterialFiberglass
-
Top Step Height8 ft
-
Top to Bottom Rung6 ft
-
TreadSlip-Resistant
-
TypeType IAA Duty Single Section
-
Rung Diameter1-1/4 in
-
Rung Spacing12 in
-
Rung TypeRound
-
Rung Width1-1/4 in
-
Series7100-1
-
Number of Rungs8
-
Overall Height8 ft
-
Overall Width18-1/16 in
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- 1-1/4 in slip resistant TRACTION-TRED® round rungs
- Plate and rung assembly are riveted at four points to each side rail to allow for rung replacement
- Rugged, heavy duty extruded rung locks are spring loaded to operate smoothly
- Pre-pierced holes for easy field installation of accessories
- Durable rail shield and shoe bracket protects rail from damage
- Dual action feet with slip resistant pad and spur plate for use on hard or penetrable surfaces
- Mar resistant molded end caps
- Ideal for utility and telecommunication industries
- Shoe with slip resistant pad and spur plate
- 1 section
- 11 ft H reach
- 8 ft L open extended
- 8 ft L closed
- 3-5/16 in rails
- 1-3/16 in flange
- 16-13/16 in W fly
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Compliant
Recently Viewed
The 7108-1 one section round rung 8 ft straight ladder is made with non-conductive fiberglass rails. Easy to transport and maneuver, these ladders bear a duty rating of 375 lb making them durable and long lasting. The slip resistant, TRACTION-TRED® rungs are round, and the durable rail shields and shoe brackets help to protect the rails from damage. The plate and rung assemblies are riveted at four points to the side rails.
1"-ID 1210-STYLE TAPER-LOCK BUSHING
SINGLE GROOVE 1" -ID A-BELT SHEAVES
Browning® 1224724 Minimum Plain Bore Type C1 Change Gear, 10 Diametral Pitch, 14.5 deg Pressure Angle, 1 in W Face, 64 Teeth, 6.4 in Dia Pitch, 1-1/4 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
CARTRIDGE INSERTS W/FELT SEALS-SEARCI212 >
3-AMP FUSES (0314003.V)-LITV314003 >
